Re: [Debconf-video] FOSDEM video coverage
> > Available equipment (based on http://cte.ulb.ac.be/images/docs/liste_auditoires2011.pdf)
> >
> > Janson:
> >
> > * wireless mic
> > * PA
>
> Janson also has a mixer with XLR output, according to the NamurLUG
> people (who have been doing this stuff for years, so I tend to believe
> them :-)
make/model would be useful. Also the existing wiring would be useful.
>
> [...]
> > Still needed:
> >
> > * 6 audience mics
> > * 3 mixers, preferably 4.
> > * 6 ambient mics (optional)
> >
> > Notes:
> >
> > * we can use the Xenyx 1202 if we don't need ambient mics. There is only 1 main volume control however,
> > so the PA volume needs to be controlled externally.
>
> I believe some of the auditoria have a PA volume knob on the desk. Would
> such a thing suffice?
>
Most likely yes, but see also 'requirements' :) In short, we need to know how the existing setup is
wired so we can figure out how to connect our equipment.
> > Actions:
> >
> > * check equipment in Ferrer and K auditorium
> > * check wiring of mics and PA in all rooms. We have the following requirements:
> > * it must be possible to send the mic output to an external mixer
> > * it must be possible to provide the input signal for the PA from an external mixer
> > * the mic output must not be wired directly to the PA (or at least it must be possible to mute
> > that connection)
>
> I'll bring this up in tomorrow's meeting.
>
Great.
Cheers,
Peter.
Reply to: