Re: Löschen einer 8-10fach CD-RW auf 4fach-Brenner mit cdrecord schlägt fehl
Dies ist eine Englischsprachige Mailingliste
Lemmi <sk-babys@nexgo.de> wrote:
> Hallo Jörg,
> ich hab in meinem Eis einen SCSI Brenner '0,2,0 | 'YAMAHA | CRW8424S '
> eingebaut.
> ich hab hier noch 6 CD-RW's 8x-10x ( Verbatim DataLifePlus ) die ich
> gerne zum brennen nehmen möchte.
> Ich hab versucht die CD-RW's mit : cdrecord -v speed=4 dev=0,2,0
> blank=fast erst mal zu löschen, bekomme aber immer diese
> Fehlermeldungen ( Ich hab den Speed auch schon auf 1,2,3 ausprobiert
> ohne Erfolg )
> ***
Der Brenner ist mehr als 6 Jahre alt und kann vermutlich keine High Speed
Roglinge.
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a53 (i586-pc-linux-gnu) Copyright (C)
> 1995-2008 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,2,0'
> scsibus: 0 target: 2 lun: 0
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 129024
> atapi: 0
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 2
> Capabilities : SYNC
> Vendor_info : 'YAMAHA '
> Identifikation : 'CRW8424S '
> Revision : '1.0j'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC SWABAUDIO
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
> Drive buf size : 3172848 = 3098 KB
> cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
> CDB: 1B 00 00 00 01 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.006s timeout 40s
> cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
> CDB: 1B 00 00 00 01 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.006s timeout 40s
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 3
> Reference speed: 6
> Disk Is not unrestricted
> Disk Is erasable
> Disk sub type: High speed Rewritable (CAV) media (1)
> ATIP start of lead in: -11635 (97:26/65)
> ATIP start of lead out: 337350 (75:00/00)
> 1T speed low: 4 1T speed high: 10
> 2T speed low: 4 2T speed high: 0 (reserved val 6)
> power mult factor: 1 5
> recommended erase/write power: 5
> A1 values: 24 1A D8
> A2 values: 26 B2 4A
> Disk type: Phase change
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> cdrecord: Input/output error. read_format_capacities: scsi sendcmd: no
> error
> CDB: 23 00 00 00 00 00 00 00 04 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 4
> cmd finished after 0.006s timeout 40s
> cdrecord: Trying to use high speed medium on low speed writer.
> ***
> Systemdaten :
> base : 1.5.3
> eiskernel: 1.6.0 (2.4.35-wt1)
> cdrecord 0.21.16 2008-10-29
>
> Kanst du mit weiterhelfen ?
Meines Wissens ist der Yamaha F1 der erste Yamaha der diese Sorte Rohlinge
unterstüzt.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni)
schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily
Reply to: