[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

problem with writing iso with newest cdrecord version



Hi !

Thanks to Jörg for the blanking fix. I tried to burn an iso to a BD-RE and he cannot close the session. Here is the log output:

[root@smooth 10]# /opt/schily/bin/cdrecord dev=3,0,0 -data test.iso
/opt/schily/bin/cdrecord: No write mode specified.
/opt/schily/bin/cdrecord: Asuming -sao mode.
/opt/schily/bin/cdrecord: If your drive does not accept -sao, try -tao.
/opt/schily/bin/cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2008 J?rg Schilling
scsidev: '3,0,0'
scsibus: 3 target: 0 lun: 0
Linux sg driver version: 3.5.34
/opt/schily/bin/cdrecord: Warning Linux Bus mapping botch.
/opt/schily/bin/cdrecord: Warning Linux Bus mapping botch.
/opt/schily/bin/cdrecord: Warning Linux Bus mapping botch.
/opt/schily/bin/cdrecord: Warning Linux Bus mapping botch.
Using libscg version 'schily-0.9'.
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'LITE-ON '
Identifikation : 'BD B LH-2B1S    '
Revision       : 'AL09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-RE driver (mmc_bdre).
Driver flags   : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Track 02: Total bytes read/written: 514574336/514574336 (251257 sectors). /opt/schily/bin/cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 01 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 1000s
/opt/schily/bin/cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 01 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 1000s
cmd finished after 0.001s timeout 1000s
Trouble closing the session


yours

Arnold




Reply to: