Re: readcd: Input/output error
Thomas Maguin <T.Maguin@web.de> wrote:
> kernel 2.6.23.1 with new PATA driver for nvidia, gentoo, cdrtools-2.01.01a36
>
> # cdrecord dev=2,1,0 blank=fast is working fine
>
> # readcd dev=2,1,0 f=test.iso
> Read speed: 7056 kB/s (CD 40x, DVD 5x, BD 1x).
> Write speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x).
> Capacity: 194430 Blocks = 388860 kBytes = 379 MBytes = 398 prMB
> Sectorsize: 2048 Bytes
> Copy from SCSI (2,1,0) disk to file 'test.iso'
> end: 194430
> readcd: Input/output error. read_g1: scsi sendcmd: no error
> CDB: 28 00 00 00 00 00 00 00 40 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
> Sense flags: Blk 0 (valid)
> cmd finished after 0.001s timeout 40s
> readcd: Input/output error. Cannot read source disk
> readcd: Retrying from sector 0.
> .~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-
> readcd: Input/output error. Error on sector 0 not corrected. Total of 1
> errors.
>
> Time total: 0.248sec
> Read 0.00 kB at 0.0 kB/sec.
> Max corected retry count was 0 (limited to 128).
> The following 1 sector(s) could not be read correctly:
> 0
What is your problem?
You did not mention the background and what you expect....
If you expect the read to fail bacause the medium should be blanked,
you seem to have a defective drive.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni)
schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Reply to: