cdrecord problems
I have two CD-RW/DVD±RW Drives:
use "cdrecord -scanbus" can see:
1,0,0 100) 'HL-DT-ST' 'DVD-RAM GSA-H30N' '1.05' Removable CD-ROM
2,0,0 200) 'TSSTcorp' 'CD/DVDW TS-H653A' 'CM00' Removable CD-ROM
I want to use cdrecord to burn a CD, when "cdrecord -v dev=2,0,0 myimg.iso", it work very well;
but when "cdrecord -v dev=1,0,0 myimg.iso" it cannot work:
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H30N'
Revision : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes:
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 84884 kB/s 482x CD 61x DVD
FIFO size : 4194304 = 4096 KB
wodim: Drive does not support TAO recording.
wodim: Illegal write mode for this drive.
It cannot detect the support mode. Can anyone help me with this ? Thanks a lot !!!
View this message in context: cdrecord problems
Sent from the cdwrite mailing list archive at Nabble.com.
Reply to: