Re: [Cdrecord-support] cdrecord doesn't appear to support high speed media (4x-12x)
On Tuesday 07 June 2005 10:17 am, Joerg Schilling wrote:
> Steven Friedrich <FreeBSD@insightbb.com> wrote:
> > > Jörg
> >
> > Yes, I have two physical computers with mobile racks and I pull out winXP
> > and put in freeBSD 4.11 or freeBSD 5.4 in each of them. I used to
> > install multi-OSes on the same physical drive, but Microscrew made me
> > sorry I ever did...
> >
> > I've been working this issue for about five days and have discovered that
> > the problem only occurs with the specific combination of high speed media
> > (Memorex 4x-12x) and freeBSD 4.11.
>
> The first and important test in such cases is to run "cdrecord -toc"
> with an _empty_ drive.
>
> If you don't get an error messagelike this:
>
> Jörg
Mine looks ok to me...
% cdrecord -toc
Cdrecord-Clone 2.01 (i386-unknown-freebsd4.11) Copyright (C) 1995-2004 Jörg
Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R5002'
Revision : '1033'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
cdrecord: No disk / Wrong disk!
--
i386 FreeBSD 4.11-STABLE
There are 10 types of people in this world. Ones that understand binary and
then, the others.
Reply to: