[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: cdrecord-prodvd don't work with BTC 1004



Title: Re: cdrecord-prodvd don't work with BTC 1004

I'm having the same problem. The os is redhat linux 9.  I was using version cdrecord-prodvd-2.01a27-i686-pc-linux-gnu until the binary expired. 

I tried downloading cdrecord-prodvd-2.01.01-i686-pc-linux-gnu (and also cdrecord-prodvd-2.01b31-pc-linux-gnu and cdrecord-prodvd-2.01-pre-i686-pc-linux-gnu) but they now report that the tao write mode is not supported by the device even though it used to work:

Message I get now:
/usr/bin/cdrecord-ProDVD -eject -pad speed=1 fs=64m dev=2,0,0 image-file
/usr/bin/cdrecord-ProDVD: No write mode specified.
/usr/bin/cdrecord-ProDVD: Asuming -tao mode.
/usr/bin/cdrecord-ProDVD: Future versions of cdrecord may have different d
rive dependent defaults.
/usr/bin/cdrecord-ProDVD: Continuing in 5 seconds...
/usr/bin/cdrecord-ProDVD: Operation not permitted. WARNING: Cannot do mloc
kall(2).
/usr/bin/cdrecord-ProDVD: WARNING: This causes a high risk for buffer unde
rruns.
/usr/bin/cdrecord-ProDVD: Operation not permitted. WARNING: Cannot set RR-
scheduler
/usr/bin/cdrecord-ProDVD: Permission denied. WARNING: Cannot set priority
using setpriority().
/usr/bin/cdrecord-ProDVD: WARNING: This causes a high risk for buffer unde
rruns.
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord-ProDVD-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-20
04 J\366rg Schilling
Unlocked features: ProDVD Clone
Limited  features:
This copy of cdrecord is licensed for: private/research/educational_non-co
mmercial_use
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-103 '
Revision       : '1.90'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
/usr/bin/cdrecord-ProDVD: Drive does not support TAO recording.
/usr/bin/cdrecord-ProDVD: Illegal write mode for this drive.

I used to get this output that recognized TAO support on the same device:
/usr/bin/cdrecord-ProDVD -eject -pad speed=1 fs=64m dev=2,0,0 image-file
/usr/bin/cdrecord-ProDVD: No write mode specified.
/usr/bin/cdrecord-ProDVD: Asuming -tao mode.
/usr/bin/cdrecord-ProDVD: Future versions of cdrecord may have different d
rive dependent defaults.
/usr/bin/cdrecord-ProDVD: Continuing in 5 seconds...
/usr/bin/cdrecord-ProDVD: Operation not permitted. WARNING: Cannot do mloc
kall(2).
/usr/bin/cdrecord-ProDVD: WARNING: This causes a high risk for buffer unde
rruns.
/usr/bin/cdrecord-ProDVD: Operation not permitted. WARNING: Cannot set RR-
scheduler
/usr/bin/cdrecord-ProDVD: Permission denied. WARNING: Cannot set priority
using setpriority().
/usr/bin/cdrecord-ProDVD: WARNING: This causes a high risk for buffer unde
rruns.
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004
J\366rg Schilling
Unlocked features: ProDVD Clone
Limited  features:
This copy of cdrecord is licensed for: private/research/educational_non-co
mmercial_use
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-103 '
Revision       : '1.90'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Revision       : '1.90'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
/usr/bin/cdrecord-ProDVD: Operation not permitted. WARNING: Cannot set RR-
scheduler
/usr/bin/cdrecord-ProDVD: Permission denied. WARNING: Cannot set priority
using setpriority().
/usr/bin/cdrecord-ProDVD: WARNING: This causes a high risk for buffer underruns.
Starting to write CD/DVD at speed 1 in real TAO mode for single session.
...



Why did it change?  Should I just use -dao ?

Sincerely,
Carolyn Owen


Reply to: