Re: DVD+R burning problem (other media okay)
David Willmore píše v čt 16. 12. 2004 v 17:48 -0500:
> > > I did some more testing on windows using the supplied burning
> > > software and it made a bad disk, so I'm starting to think it's
> > > the burner at this point.
> >
> > Sony is known to be picky about media. I won't be surpised if you will
> > eventually find DVD+R media brand, which would work with your unit. If
> > not, it's most likely hardware deficiency and you should ask for
> > replacement. A.
>
> Thanks for the response, Andy. If I were sure it was a media incompatability,
> I could live with it--DVD-R is plenty good and I don't need the 16x burning.
> And I was hoping the second media would be a good proof (either pro or con)
> that media was the issue. Since they both didn't burn right, shall I try
> again (if so, what brand of media should I use?) or should I try to get a
> replacement--for which I have to find a 2k or XP box and duplicate the error.
> *sigh*
Go for replacement, absolutely. Your unit is defective. There's just no
justification for modern unit to not burn CMC Mag. +R media properly.
[ happy owner of DRU-700A ]
--
Pav Lucistnik <pav@oook.cz>
<pav@FreeBSD.org>
Linux is a happy free-for-all chaos.
Reply to: