Re: DVD+R burning problem (other media okay)
> What writer do you use?
>
> Jörg
Just to provide some more data: I purchased another spindle
of DVD+R media branded 8x by Memorex. dvd+rw-mediainfo says:
INQUIRY: [SONY ][DVD RW DRU-710A ][BYX2]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Bh, DVD+R
Media ID: CMC MAG/E01
Current Write Speed: 8.0x1385=11080KB/s
Write Speed #0: 8.0x1385=11080KB/s
Write Speed #1: 6.0x1385=8310KB/s
Write Speed #2: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 3.2x1385=4432KB/s@[0 -> 0]
Speed Descriptor#0: 00/0 R@3.2x1385=4432KB/s W@8.0x1385=11080KB/s
Speed Descriptor#1: 00/0 R@3.2x1385=4432KB/s W@6.0x1385=8310KB/s
Speed Descriptor#2: 00/0 R@3.2x1385=4432KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: A1h, DVD+R book [revision 1]
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 2295104*2KB
Track Size: 2295104*2KB
ROM Compatibility LBA: 262144
READ CAPACITY: 1*2048=2048
and cdrecord-ProDVD says:
book type: DVD+R, Version 1 (10.1)
disc size: 120mm (0)
minimum rate: Not specified (15)
number of layers:0
track path: Parallel Track Path (0)
layer type: Rewritable Area (2)
linear density: 0.267 µm/bit (0)
track density: 0.74 µm/track (0)
phys start: 196608
phys end: 2491711
end layer 0: 0
bca: 0
phys size:... 2295104
Manufacturer: 'CMC MAG'
Media type: 'E01'
Category/Version A1
Disk size 0F
Disk structure 02
Recoding density 00
Manufacturer: 'CMC MAG'
Media type: 'E01'
Product revision 0
ADIP numbytes 56
Reference speed 35
Max speed 84
copyr prot type: 0
region mgt info: 0
The other kind of +R media which fails is branded Teon
as 4x and mediainfo says:
INQUIRY: [SONY ][DVD RW DRU-710A ][BYX2]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Bh, DVD+R
Media ID: PHILIPS/C08
Current Write Speed: 8.0x1385=11080KB/s
Write Speed #0: 8.0x1385=11080KB/s
Write Speed #1: 6.0x1385=8310KB/s
Write Speed #2: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 3.2x1385=4432KB/s@[0 -> 0]
Speed Descriptor#0: 00/0 R@3.2x1385=4432KB/s W@8.0x1385=11080KB/s
Speed Descriptor#1: 00/0 R@3.2x1385=4432KB/s W@6.0x1385=8310KB/s
Speed Descriptor#2: 00/0 R@3.2x1385=4432KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: A1h, DVD+R book [revision 1]
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 2295104*2KB
Track Size: 2295104*2KB
ROM Compatibility LBA: 262144
READ CAPACITY: 1*2048=2048
cdrecord-DVDpro says:
book type: DVD+R, Version 1 (10.1)
disc size: 120mm (0)
minimum rate: Not specified (15)
number of layers:0
track path: Parallel Track Path (0)
layer type: Rewritable Area (2)
linear density: 0.267 µm/bit (0)
track density: 0.74 µm/track (0)
phys start: 196608
phys end: 2491711
end layer 0: 0
bca: 0
phys size:... 2295104
Manufacturer: 'PHILIPS'
Media type: 'C08'
Category/Version A1
Disk size 0F
Disk structure 02
Recoding density 00
Manufacturer: 'PHILIPS'
Media type: 'C08'
Product revision 0
ADIP numbytes 56
Reference speed 35
Max speed 84
copyr prot type: 0
region mgt info: 0
I can provide the info on the -R and +RW media which does work
if that would be helpful. I'm going to reboot the box into
windows and use the copy of Nero that came with the drive and
see if it can burn +R media. If not, it's probably a drive
or firmware issue. If not?
Thanks for your help Jörg.
Cheers,
David
Reply to: