Re: Sony DRU-700A gets errors writing ordinary CD.
> HERE is the cdrecord output:
>
> root@kotto:/home/clare# cdrecord -v -dao speed=16 fs=16m dev=ATAPI:0,0,0
> 041001.iso
^^^^^^^^^^^^^^^^^^^
You are using
a Linux device driver your parents did already warn you
about.....
> Cdrecord 2.00.3 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
completely outdated
http://www.fokus.fhg.de/research/cc/glone/employees/joerg.schilling/private/problems.html
> TOC Type: 1 = CD-ROM
> scsidev: 'ATAPI:0,0,0'
> devname: 'ATAPI'
> scsibus: 0 target: 0 lun: 0
> Warning: Using ATA Packet interface.
> Warning: The related libscg interface code is in pre alpha.
> Warning: There may be fatal problems.
> Using libscg version 'schily-0.7'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'DVD RW DRU-700A '
> Revision : 'VY02'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
> code.
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
> cdrecord-ProDVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> Drive buf size : 1895168 = 1850 KB
> FIFO size : 16777216 = 16384 KB
> Track 01: data 275 MB
> Total size: 316 MB (31:19.89) = 140992 sectors
> Lout start: 316 MB (31:21/67) = 140992 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: -11077 (97:34/23)
> ATIP start of lead out: 359848 (79:59/73)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359848 Blocks current: 359848 Blocks remaining: 218856
> Forcespeed is OFF.
> Starting to write CD/DVD at speed 16 in real SAO mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Performing OPC...
>
>
> Sending CUE sheet...
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> Track 01: 6 of 275 MB written (fifo 83%) [buf 5%] 12.4x.cdrecord:
> Input/output erro
> r. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 0C 5A 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 09 00 00 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.003s timeout 200s
This is the expected behavior using this driver on Linux.
If you diduse a recent cdrecord version, you would see warning messages
that lead you to correct usage.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: