Joerg Schilling wrote:
From: "F. Poncin" <frederic.poncin@maildump.org>Fyi, with new Firmware 1.0.5Version with dinfo[32+4] [root@troll dvd+rw-tools-5.17.4.8.6]# ./testf /dev/scd200 20 1e 01 01 01 01 01 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Version with dinfo[32] [root@troll dvd+rw-tools-5.17.4.8.6]# ./testfno4 /dev/scd200 20 1e 01 01 01 01 01 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00You did not write that, but I asume that cdrecord-ProDVD now works with this drive.... ~ Jörg
I did a quick test with the following setup: - linux-2.6.4-rc1-mm2 - cdrecord.prodvd 2.01a25 - UHCI driver -> older VIA motherboard (no high-speed usb) - Imation media (see below). No problem to write 1.5G image to the disk ... but awfully slow. More tests when I receive a newer PC with high speed usb. -- Frédéric [root@troll root]# dvd+rw-mediainfo /dev/scd2 INQUIRY: [PLEXTOR ][DVDR PX-708A ][1.05] GET [CURRENT] CONFIGURATION: Mounted Media: 1Ah, DVD+RW Media ID: RICOHJPN/W01 Current Write Speed: 2.4x1385=3324KB/s Write Speed #0: 2.4x1385=3324KB/s GET [CURRENT] PERFORMANCE: Write Performance: 2.4x1385=3324KB/s@[0 -> 2294911] Speed Descriptor#0: 03/2295103 R@8.0x1385=11080KB/s W@2.4x1385=3324KB/s:-[ READ DVD STRUCTURE#0 failed with SK=5h/ASC=24h/ACQ=00h]: Input/output error
READ DISC INFORMATION: Disc status: blank Number of Sessions: 1 State of Last Session: empty Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: blank Track Start Address: 0*2KB Next Writable Address: 0*2KB Free Blocks: 2295104*2KB Track Size: 2295104*2KB