how to read second track of a multisessioned dvd+r, in the burner ?
Hi all, I burn a dvd+r, with multisession.
The commands I issued were:
growisofs -Z /dev/dvd -R -J firstfile
growisofs -M /dev/dvd -R -J secondfile
how can I access secondfile ? I am trying to do it in the same recorder I used to burn the dvd, not in a dvd-ROM
...
if I try
mount -t iso9660 /dev/scd0 /mnt
I see only firstfile.
I tried the session=x option of mount, too, but it does not work.
I was not able to guess if and how to use the sbsector=xxx option.
Below you can see the output of dvd+rw-mediainfo for my dvd ... any help ?
thanks and bye,
Andrea
INQUIRY: [ATAPI ][DVD+RW 4X4X12 ][B1HY]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Bh, DVD+R
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
Write Speed #1: 2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 2295103]
Speed Descriptor#0: 00/2295103 R@3.5x1385=4787KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: A1h, DVD+R book [revision 1]
Media ID: /
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 3
State of Last Session: empty
"Next" Track: 3
Number of Tracks: 3
READ TRACK INFORMATION[#1]:
Track State: complete
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Track Size: 104784*2KB
READ TRACK INFORMATION[#2]:
Track State: complete
Track Start Address: 106832*2KB
Free Blocks: 0*2KB
Track Size: 275232*2KB
READ TRACK INFORMATION[#3]:
Track State: blank
Track Start Address: 384112*2KB
Next Writable Address: 384112*2KB
Free Blocks: 1910992*2KB
Track Size: 1910992*2KB
FABRICATED TOC:
Track#1 : 14@0
Track#2 : 14@106832
Track#AA : 14@382064
Multi-session Info: #2@106832
--
andrea@tasso.info
----- End forwarded message -----
--
andrea@tasso.info
Reply to: