SONY DVD+/-RW, DWU14A under RHE
Hi everyone,
we got a SONY DVD+/-RW model DW14A and try to write with it 2x dvd's
under RHE (with the kernel version 2.4.21). The errors we are getting:
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.5'
dvdrecord: Warning: using inofficial libscg transport code version
(schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c
1.69 02/01/18 Copyright 1997 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DW-U14A '
Revision : '1.0d'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 4718592 = 4608 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 24 KB
Total size: 0 MB (00:04.00) = 300 sectors
Lout start: 1 MB (00:06/00) = 300 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2298196
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 470
Track 01: 0 of 0 MB written.dvdrecord: Input/output error. write_g1:
scsi sendcmd: no error
CDB: 2A 00 00 00 01 D6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.007s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing time: 15.168s
Fixating...
Fixating time: 0.001s
dvdrecord: fifo had 10 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Can anyone help with that?????? THANKS!!!!!!!!
Reply to: