Re: Re: plextor px-708uf: cannot get disk type
>From magliery@csb.yale.edu Fri Jan 23 19:43:47 2004
>Joerg, I only can detect one message in single-user mode, and it's not
>too helpful:
>============================
>Jan 23 14:23:09 reganlinux kernel: cdrom: This disc doesn't have any
>tracks I recognize!
>Jan 23 14:23:40 reganlinux last message repeated 31 times
>Jan 23 14:24:41 reganlinux last message repeated 59 times
>Jan 23 14:25:42 reganlinux last message repeated 60 times
>Jan 23 14:26:43 reganlinux last message repeated 60 times
>Jan 23 14:27:44 reganlinux last message repeated 60 times
>Jan 23 14:28:45 reganlinux last message repeated 59 times
>Jan 23 14:29:46 reganlinux last message repeated 58 times
>Jan 23 14:30:47 reganlinux last message repeated 60 times
>Jan 23 14:31:48 reganlinux last message repeated 60 times
>Jan 23 14:32:49 reganlinux last message repeated 60 times
>Jan 23 14:33:50 reganlinux last message repeated 60 times
>=======================
This looks like there is _still_ a program running that tries to access
the drive.... Please try to find this program.
>This error is obviously independent of my running dvdrecord, which I did
>during this time, also. It gives the same error as below. I am using:
>dvdrecord -atip /dev=0,0,0.
>This is from /var/log/messages. I can't find anything else that seems
>to be relvent anywhere else. Just in case, at the end of my email is
>the whole contents of /var/log/messages from my last restart...
>Tom
> >From magliery@csb.yale.edu Mon Jan 19 20:45:02 2004
> >I updated the Plextor PX-708UF firmware to 1.04 using PXUpdate in linux.
> > I still get the same error, either in xcdroast or when I do dvdrecord
> >-atip dev=0,0,0 in single user mode:
> >==========
> >scsidev: '0,0,0'
> >scsibus: 0 target: 0 lun: 0
> >Linux sg driver version: 3.1.24
> >Cdrecord-ProDVD-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C)
> >1995-2004 Jörg Schilling
> >Unlocked features: ProDVD Clone
> >Limited features:
> >This copy of cdrecord is licensed for:
> >private/research/educational_non-commercial_use
> >Using libscg version 'schily-0.8'.
> >Device type : Removable CD-ROM
> >Version : 2
> >Response Format: 1
> >Vendor_info : 'PLEXTOR '
> >Identifikation : 'DVDR PX-708A '
> >Revision : '1.04'
> >Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> >Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> >Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
>RAW/R96R
> >cdrecord.prodvd: Input/output error. read disk info: scsi sendcmd: no
>error
> >CDB: 51 00 00 00 00 00 00 00 24 00
> >status: 0x2 (CHECK CONDITION)
> >Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00
> >Sense Key: 0x0 No Additional Sense, Segment 0
> >Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> >Sense flags: Blk 0 (not valid)
> >cmd finished after 0.002s timeout 240s
> >cdrecord.prodvd: Cannot get disk type.
> >===============
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: