V po, 19. 01. 2004 v 16:02, Joerg Schilling píše:
> >OS: Solaris 9, x386
> >cdrecord version: cd-record-prodvd-2.01a12-i386-pc-solaris2.9
> >DVD Model: Sony DRU-510A
>
> >When I try to burn a DVD (using DVD-R media this is the results I get ...
>
> >cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree /var/system/win32ahc.iso
> >Cdrecord-ProDVD-Clone 2.01a12 (i386-pc-solaris2.9) Copyright (C) 1995-2003
> >Jörg
> >Schilling
> >Unlocked features: ProDVD Clone
> >Limited features:
> >This copy of cdrecord is licensed for:
> >private/research/educational_non-commerci
> >al_use
> >scsidev: '1,0,0'
> >scsibus: 1 target: 0 lun: 0
> >Warning: Using USCSI interface.
> >Using libscg version 'schily-0.7'
> >Device type : Removable CD-ROM
> >Version : 0
> >Response Format: 2
> >Capabilities :
> >Vendor_info : 'SONY '
> >Identifikation : 'DVD RW DRU-510A '
> >Revision : '1.0a'
> >Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> >Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
> >Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> >Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
> >Starting to write CD/DVD at speed 2 in real TAO mode for single session.
> >Last chance to quit, starting real write 0 seconds. Operation starts.
> >cdrecord: I/O error. write_g1: scsi sendcmd: no error
> >CDB: 2A 00 00 00 08 B8 00 00 1F 00
> >status: 0x2 (CHECK CONDITION)
> >Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 C0 00 02
> >Sense Key: 0x5 Illegal Request, Segment 0
> >Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
> >Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not
> >vali
> >d) field ptr 2
> >resid: 63488
> >cmd finished after 0.007s timeout 100s
> >write track data: error after 4571136 bytes
> >cdrecord: The current problem looks like a buffer underrun.
> >cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
> >cdrecord: Please report.
> >cdrecord: Make sure that you are root, enable DMA and check your HW/OS set
> >up.
>
> Maybe your drive does not support burnfree with DVDs.
>
> Note that some drives return this type of error condition when the drive
> does not like the medium.
Also try -dao mode. I have the same unit (under different OS) and I was
only able to write DVD-R in -dao mode.
--
Pav Lucistnik <pav@oook.cz>
<pav@FreeBSD.org>
> With a 10 MHz 386 the downloading speed would most likely drop to a crawl
> or stop with the decoding process etc.
I think most 10MHz 386 users are quite accustomed to things dropping
to a crawl.
Attachment:
signature.asc
Description: Toto je =?iso-8859-2?Q?digit=E1ln=EC?= =?ISO-8859-1?Q?_podepsan=E1?= =?iso-8859-2?Q?_=E8=E1st?= =?ISO-8859-1?Q?_zpr=E1vy?=