Re: growisofs blanking problem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andy Polyakov wrote:
>>4693721088/4700372992 (99.9%) @2.0x, remaining 0:02
>
> ^^^^^ With DVD+RW? Can you really
> confirm that your unit burns DVD+RW at 2x? Verify with
> dvd+rw-mediainfo...
INQUIRY: [DVDRW ][IDE1004 ][0039]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Ah, DVD+RW
Current Write Speed: 2.0x1385=2770KB/s
Write Speed #0: 2.0x1385=2770KB/s
Write Speed #1: 1.0x1385=1385KB/s
GET PERFORMANCE:
Speed Descriptor#0: 00/2295103 Reading@1.0x Writing@2.0x
READ DVD STRUCTURE[#0h]:
Media Book Type: 92h, DVD+RW book [revision 2]
Media ID: CMC MAG/W01
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: complete
Number of Sessions: 1
State of Last Session: complete
Number of Tracks: 1
BG Format Status: suspended
READ TRACK INFORMATION[#1]:
Track State: complete
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Track Size: 2295104*2KB
FABRICATED TOC:
Track#1 : 14@0
Track#AA : 14@2295104
Multi-session Info: #1@0
> growisofs burns till it hits the media edge or input is exhausted. As
> /dev/zero is never exhausted, growisofs -Z /dev/dvd=/dev/zero is bound
> to fail and you have all rights to expect it to. Normally it fails with
> "No space left on device." The fact that you see 2/4/8 indicates that
> you firmware has glitch. Yet it doesn't really change the fact that
> media was actually nullified and you should be able to just proceed. A.
Yeah, I can use the media just fine, I was basically just wondering what
caused the error message. I guess I see if the manufacturer has a
firmware update...
- -Joe
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)
iD8DBQE/1RyWKc8oZ1MoTeoRAvLmAKD3xH+T1FBJlF1Y4tzu4DSfKWqjXgCfQP6C
2iSzypnlfO3nPecLHAafCSM=
=jXJo
-----END PGP SIGNATURE-----
Reply to: