Re: Cdrecord bug in DAO mode (version 2.01a19)
>From trentalg@aston.ac.uk Fri Oct 24 05:28:44 2003
>Each time I try to burn an Audio CD in DAO mode using Cdrecord and my
>QSI Combo CD-writer (I tried speed=4,8,12,16) I receive an error as the
>one in the attached file and the CD writing process fails with the waste
>of a blank media (I disposed tons of useless blank CDs).
>Everything works fine in TAO mode, though I need to use DAO in order not
>to have the silence gap between audio tracks.
>I am currently using a Redhat 9 distributions and a custom-compiled
>kernel 2.4.22. Cdrecord version is 2.01a19 but I also encounter the same
>problem with the original version supplied by Redhat.
>Any help/advice/patch would be greatly appreciated.
>Also, I wish to express a warm "thanks" to all the developers involved
>in the Cdrecord project for providing us this great piece of software.
>Regards,
>Guido
>--=-8Lfkags299yMpplZof9E
>Content-Disposition: attachment; filename=cdrecord.out
>Content-Type: text/plain; name=cdrecord.out; charset=UTF-8
>Content-Transfer-Encoding: 7bit
>Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=ATAPI:0,0,0 gracetime=2 fs=12288k driveropts=burnfree -v -useinfo speed=8 -dao -overburn -ignsize -immed -text -audio "/mnt/hda2/track-01.wav" ...
>scsidev: 'ATAPI:0,0,0'
>devname: 'ATAPI'
>scsibus: 0 target: 0 lun: 0
>Warning: Using ATA Packet interface.
>Warning: The related libscg interface code is in pre alpha.
>Warning: There may be fatal problems.
>SCSI buffer size: 64512
>TOC Type: 0 = CD-DA
>Using libscg version 'schily-0.7'
>Driveropts: 'burnfree'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : 'QSI '
>Identifikation : 'DVD/CDRW SBW-161'
>Revision : 'SX13'
>Device seems to be: Generic mmc2 DVD-ROM.
>Current: 0x0009
>Profile: 0x0010
>Profile: 0x0008
>Profile: 0x0009 (current)
>Profile: 0x000A
>Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>Driver flags : MMC-2 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>Drive buf size : 1605632 = 1568 KB
>FIFO size : 12582912 = 12288 KB
>pregap1: -1
>Track 01: audio 58 MB (05:49.45) no preemp copy
>Track 02: audio 35 MB (03:33.65) no preemp copy pregapsize: 0
>Track 03: audio 43 MB (04:16.53) no preemp copy pregapsize: 0
>Track 04: audio 50 MB (04:59.57) no preemp copy pregapsize: 0
>Track 05: audio 62 MB (06:09.28) no preemp copy pregapsize: 0
>Track 06: audio 61 MB (06:04.90) no preemp copy pregapsize: 0
>Track 07: audio 52 MB (05:14.54) no preemp copy pregapsize: 0
>Track 08: audio 64 MB (06:20.54) no preemp copy pregapsize: 0
>Track 09: audio 50 MB (05:02.92) no preemp copy pregapsize: 0
>Track 10: audio 54 MB (05:25.28) no preemp copy pregapsize: 0
>Track 11: audio 52 MB (05:10.74) no preemp copy pregapsize: 0
>Track 12: audio 54 MB (05:25.54) no preemp copy pregapsize: 0
>Track 13: audio 50 MB (04:58.00) no preemp copy pregapsize: 0
>Track 14: audio 55 MB (05:30.96) no preemp copy pregapsize: 0
>Total size: 747 MB (74:01.94) = 333146 sectors
>Lout start: 747 MB (74:03/71) = 333146 sectors
>Current Secsize: 2048
>ATIP info from disk:
>Indicated writing power: 5
>Is not unrestricted
>Is not erasable
>Disk sub type: Medium Type A, low Beta category (A-) (2)
>ATIP start of lead in: -11634 (97:26/66)
>ATIP start of lead out: 359846 (79:59/71)
>Disk type: Short strategy type (Phthalocyanine or similar)
>Manuf. index: 3
>Manufacturer: CMC Magnetics Corporation
>Blocks total: 359846 Blocks current: 359846 Blocks remaining: 26700
>Starting to write CD/DVD at speed 8 in real SAO mode for single session.
>Waiting for reader process to fill input buffer ...
>input buffer ready.
>BURN-Free is ON.
>Performing OPC...
>Sending CUE sheet...
>SAO startsec: -11634
>Writing lead-in...
>Lead-in write time: 20.086s
>Writing pregap for track 1 at -150
>Starting new track at sector: 0
>Track 01: Total bytes read/written: 61643568/61643568 (26209 sectors).
>Starting new track at sector: 26209
>Track 02: Total bytes read/written: 37688448/37688448 (16024 sectors).
>Starting new track at sector: 42233
>Track 03: Total bytes read/written: 45252480/45252480 (19240 sectors).
>Starting new track at sector: 61473
>Track 04: Total bytes read/written: 52844736/52844736 (22468 sectors).
>Starting new track at sector: 83941
>Track 05: Total bytes read/written: 65140992/65140992 (27696 sectors).
>Starting new track at sector: 111637
>Track 06: Total bytes read/written: 64369536/64369536 (27368 sectors).
>Starting new track at sector: 139005
>Track 07: Total bytes read/written: 55486032/55486032 (23591 sectors).
>Starting new track at sector: 162596
>cdrecord: Input/output error. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 02 8E DD 00 00 1B 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00
>Sense Key: 0x3 Medium Error, Segment 0
>Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.000s timeout 200s
>cdrecord: A write error occured.
>cdrecord: Please properly read the error message above.
What do you expect when you use low quality media on a low quality drive?
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: