|
-- -Ed |
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 2f7db000 - 3000f250 [ 0.000000] ACPI: RSDP 000f8750 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ffc0000 00030 (v01 A M I OEMRSDT 07000620 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffc0200 00084 (v02 A M I OEMFACP 07000620 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffc0400 03BB1 (v01 12345 12345123 00000123 INTL 20051117) [ 0.000000] ACPI: FACS 3ffce000 00040 [ 0.000000] ACPI: APIC 3ffc0390 0006C (v01 A M I OEMAPIC 07000620 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffce040 00060 (v01 A M I AMI_OEM 07000620 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 139MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [002f7db000 - 003000f250] RAMDISK ==> [002f7db000 - 003000f250] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014ca000 - 00014d0101] BRK ==> [00014ca000 - 00014d0101] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffc0 [ 0.000000] On node 0 totalpages: 261967 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 280 pages used for memmap [ 0.000000] HighMem zone: 35498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34296 r0 d23048 u1048576 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259919 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=3e26fdd6-7f07-454f-a4c6-5c224f0c3e6e ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003ffc0) [ 0.000000] Memory: 1024540k/1048320k available (2501k kernel code, 22596k reserved, 1323k data, 376k init, 143112k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 3466.497 MHz processor. [ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6932.99 BogoMIPS (lpj=13865988) [ 0.012030] Security Framework initialized [ 0.012040] SELinux: Disabled at boot. [ 0.012051] Mount-cache hash table entries: 512 [ 0.012227] Initializing cgroup subsys ns [ 0.012233] Initializing cgroup subsys cpuacct [ 0.012237] Initializing cgroup subsys devices [ 0.012240] Initializing cgroup subsys freezer [ 0.012243] Initializing cgroup subsys net_cls [ 0.012279] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.012282] CPU: L2 cache: 512K [ 0.012285] CPU: Hyper-Threading is disabled [ 0.012290] mce: CPU supports 4 MCE banks [ 0.012304] CPU0: Thermal monitoring enabled (TM1) [ 0.012310] using mwait in idle threads. [ 0.012321] Performance Events: no PMU driver, software events only. [ 0.012331] Checking 'hlt' instruction... OK. [ 0.028559] SMP alternatives: switching to UP code [ 0.034921] ACPI: Core revision 20090903 [ 0.042980] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044187] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083874] CPU0: Intel(R) Celeron(R) D CPU 3.46GHz stepping 05 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (6932.99 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1 [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] bio: create slab <bio-0> at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.087415] ACPI: Executed 1 blocks of module-level executable AML code [ 0.092130] ACPI: Interpreter enabled [ 0.092136] ACPI: (supports S0 S3 S4 S5) [ 0.092160] ACPI: Using IOAPIC for interrupt routing [ 0.101510] ACPI: No dock devices found. [ 0.101677] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.101735] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xfc000000-0xfdffffff] [ 0.102076] pci 0000:00:01.0: supports D1 [ 0.102122] pci 0000:00:09.0: reg 10 io port: [0xe800-0xe8ff] [ 0.102130] pci 0000:00:09.0: reg 14 32bit mmio: [0xff6ffc00-0xff6fffff] [ 0.102158] pci 0000:00:09.0: reg 30 32bit mmio pref: [0xff6c0000-0xff6dffff] [ 0.102178] pci 0000:00:09.0: supports D1 D2 [ 0.102181] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102186] pci 0000:00:09.0: PME# disabled [ 0.102212] pci 0000:00:0a.0: reg 10 32bit mmio: [0xff6fc000-0xff6fdfff] [ 0.102286] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07] [ 0.102294] pci 0000:00:0f.0: reg 14 io port: [0xe480-0xe483] [ 0.102302] pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407] [ 0.102310] pci 0000:00:0f.0: reg 1c io port: [0xe080-0xe083] [ 0.102318] pci 0000:00:0f.0: reg 20 io port: [0xe000-0xe00f] [ 0.102325] pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff] [ 0.102408] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.102503] pci 0000:00:10.0: reg 20 io port: [0xdc00-0xdc1f] [ 0.102532] pci 0000:00:10.0: supports D1 D2 [ 0.102535] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102539] pci 0000:00:10.0: PME# disabled [ 0.102596] pci 0000:00:10.1: reg 20 io port: [0xd480-0xd49f] [ 0.102626] pci 0000:00:10.1: supports D1 D2 [ 0.102628] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102633] pci 0000:00:10.1: PME# disabled [ 0.102688] pci 0000:00:10.2: reg 20 io port: [0xd400-0xd41f] [ 0.102718] pci 0000:00:10.2: supports D1 D2 [ 0.102720] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102725] pci 0000:00:10.2: PME# disabled [ 0.102785] pci 0000:00:10.3: reg 20 io port: [0xd080-0xd09f] [ 0.102815] pci 0000:00:10.3: supports D1 D2 [ 0.102817] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102822] pci 0000:00:10.3: PME# disabled [ 0.102858] pci 0000:00:10.4: reg 10 32bit mmio: [0xff6ff800-0xff6ff8ff] [ 0.102907] pci 0000:00:10.4: supports D1 D2 [ 0.102910] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102914] pci 0000:00:10.4: PME# disabled [ 0.102988] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.103050] pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff] [ 0.103101] pci 0000:00:11.5: supports D1 D2 [ 0.103142] pci 0000:00:12.0: reg 10 io port: [0xc400-0xc4ff] [ 0.103150] pci 0000:00:12.0: reg 14 32bit mmio: [0xff6ff400-0xff6ff4ff] [ 0.103195] pci 0000:00:12.0: supports D1 D2 [ 0.103197] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.103202] pci 0000:00:12.0: PME# disabled [ 0.103268] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.103275] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 0.103282] pci 0000:01:00.0: reg 18 32bit mmio: [0xff5f0000-0xff5fffff] [ 0.103300] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff5c0000-0xff5dffff] [ 0.103323] pci 0000:01:00.0: supports D1 D2 [ 0.103355] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.103362] pci 0000:01:00.1: reg 14 32bit mmio: [0xff5e0000-0xff5effff] [ 0.103398] pci 0000:01:00.1: supports D1 D2 [ 0.103451] pci 0000:00:01.0: bridge io port: [0x9000-0xbfff] [ 0.103456] pci 0000:00:01.0: bridge 32bit mmio: [0xff500000-0xff5fffff] [ 0.103461] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdbf00000-0xfbefffff] [ 0.103471] pci_bus 0000:00: on NUMA node 0 [ 0.103477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.103676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.115640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.115767] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.115891] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.116024] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116151] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116275] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116398] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116521] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116656] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.116659] vgaarb: loaded [ 0.116761] PCI: Using ACPI for IRQ routing [ 0.116964] Switching to clocksource tsc [ 0.118446] pnp: PnP ACPI init [ 0.118472] ACPI: bus type pnp registered [ 0.123234] pnp: PnP ACPI: found 10 devices [ 0.123237] ACPI: ACPI bus type pnp unregistered [ 0.123243] PnPBIOS: Disabled by ACPI PNP [ 0.123261] system 00:06: ioport range 0xa00-0xa0f has been reserved [ 0.123264] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.123268] system 00:06: ioport range 0xa20-0xa2f has been reserved [ 0.123271] system 00:06: ioport range 0xa30-0xa3f has been reserved [ 0.123274] system 00:06: ioport range 0xa40-0xa4f has been reserved [ 0.123281] system 00:07: ioport range 0x3e0-0x3e7 has been reserved [ 0.123285] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.123288] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.123291] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.123298] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.123302] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.123308] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.123312] system 00:09: iomem range 0xc0000-0xcffff could not be reserved [ 0.123315] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.123319] system 00:09: iomem range 0x100000-0x3fffffff could not be reserved [ 0.123322] system 00:09: iomem range 0xff380000-0xffffffff could not be reserved [ 0.158100] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.158104] pci 0000:00:01.0: IO window: 0x9000-0xbfff [ 0.158111] pci 0000:00:01.0: MEM window: 0xff500000-0xff5fffff [ 0.158116] pci 0000:00:01.0: PREFETCH window: 0xdbf00000-0xfbefffff [ 0.158137] pci 0000:00:01.0: setting latency timer to 64 [ 0.158144] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.158147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.158150] pci_bus 0000:01: resource 0 io: [0x9000-0xbfff] [ 0.158153] pci_bus 0000:01: resource 1 mem: [0xff500000-0xff5fffff] [ 0.158156] pci_bus 0000:01: resource 2 pref mem [0xdbf00000-0xfbefffff] [ 0.158199] NET: Registered protocol family 2 [ 0.158315] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.158758] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.159867] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.160531] TCP: Hash tables configured (established 131072 bind 65536) [ 0.160535] TCP reno registered [ 0.160715] NET: Registered protocol family 1 [ 0.160747] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.160838] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.160848] pci 0000:01:00.0: Boot video device [ 0.160931] Unpacking initramfs... [ 0.428819] Freeing initrd memory: 8400k freed [ 0.440833] audit: initializing netlink socket (disabled) [ 0.440854] type=2000 audit(1296825290.439:1): initialized [ 0.444017] highmem bounce pool size: 64 pages [ 0.444024] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.445443] VFS: Disk quotas dquot_6.5.2 [ 0.445504] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.445598] msgmni has been set to 1739 [ 0.445841] alg: No test for stdrng (krng) [ 0.445912] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.445916] io scheduler noop registered [ 0.445918] io scheduler anticipatory registered [ 0.445920] io scheduler deadline registered [ 0.445959] io scheduler cfq registered (default) [ 0.446189] isapnp: Scanning for PnP cards... [ 0.800257] isapnp: No Plug & Play device found [ 0.801798] Linux agpgart interface v0.103 [ 0.801928] agpgart: Detected VIA VT3314 chipset [ 0.804386] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xfc000000 [ 0.804428] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.804828] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.804831] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.805025] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.805128] mice: PS/2 mouse device common for all mice [ 0.805187] rtc_cmos 00:02: RTC can wake from S4 [ 0.805235] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.805291] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.805304] cpuidle: using governor ladder [ 0.805306] cpuidle: using governor menu [ 0.805313] No iBFT detected. [ 0.805708] TCP cubic registered [ 0.805829] NET: Registered protocol family 10 [ 0.806383] lo: Disabled Privacy Extensions [ 0.806748] Mobile IPv6 [ 0.806753] NET: Registered protocol family 17 [ 0.806774] Using IPI No-Shortcut mode [ 0.806875] PM: Resume from disk failed. [ 0.806889] registered taskstats version 1 [ 0.807285] rtc_cmos 00:02: setting system clock to 2011-02-04 13:14:51 UTC (1296825291) [ 0.807314] Initalizing network drop monitor service [ 0.807354] Freeing unused kernel memory: 376k freed [ 0.807811] Write protecting the kernel text: 2504k [ 0.807827] Write protecting the kernel read-only data: 920k [ 0.833945] udev[46]: starting version 164 [ 0.886607] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 0.886666] tulip 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.887245] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1. [ 1.105138] eth0: ADMtek Comet rev 17 at Port 0xe800, 00:12:17:53:e9:28, IRQ 17. [ 1.113794] SCSI subsystem initialized [ 1.151740] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.151808] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.156020] usbcore: registered new interface driver usbfs [ 1.156223] usbcore: registered new interface driver hub [ 1.156436] usbcore: registered new device driver usb [ 1.157450] eth1: VIA Rhine II at 0x1c400, 00:19:21:01:05:07, IRQ 23. [ 1.158164] eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1. [ 1.164076] libata version 3.00 loaded. [ 1.173018] sata_via 0000:00:0f.0: version 2.4 [ 1.173050] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.173103] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 1.184919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185570] scsi0 : sata_via [ 1.185821] scsi1 : sata_via [ 1.187765] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 20 [ 1.187769] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20 [ 1.187831] pata_via 0000:00:0f.1: version 0.3.4 [ 1.187855] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.188502] scsi2 : pata_via [ 1.188674] scsi3 : pata_via [ 1.190988] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.190991] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.191155] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 1.191190] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 1.191228] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 1.191306] ehci_hcd 0000:00:10.4: irq 21, io mem 0xff6ff800 [ 1.200019] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 1.200063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.200067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.200070] usb usb1: Product: EHCI Host Controller [ 1.200072] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.200075] usb usb1: SerialNumber: 0000:00:10.4 [ 1.200187] usb usb1: configuration #1 chosen from 1 choice [ 1.200231] hub 1-0:1.0: USB hub found [ 1.200246] hub 1-0:1.0: 8 ports detected [ 1.226288] uhci_hcd: USB Universal Host Controller Interface driver [ 1.226371] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.226385] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.226402] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.226432] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00 [ 1.226486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.226489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.226492] usb usb2: Product: UHCI Host Controller [ 1.226494] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.226496] usb usb2: SerialNumber: 0000:00:10.0 [ 1.226707] usb usb2: configuration #1 chosen from 1 choice [ 1.226786] hub 2-0:1.0: USB hub found [ 1.226801] hub 2-0:1.0: 2 ports detected [ 1.226871] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.226881] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.226891] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.226916] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d480 [ 1.226956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.226959] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.226961] usb usb3: Product: UHCI Host Controller [ 1.226963] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.226966] usb usb3: SerialNumber: 0000:00:10.1 [ 1.227118] usb usb3: configuration #1 chosen from 1 choice [ 1.227193] hub 3-0:1.0: USB hub found [ 1.227207] hub 3-0:1.0: 2 ports detected [ 1.227270] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.227279] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.227289] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.227314] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 [ 1.227358] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.227361] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.227363] usb usb4: Product: UHCI Host Controller [ 1.227365] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.227368] usb usb4: SerialNumber: 0000:00:10.2 [ 1.227518] usb usb4: configuration #1 chosen from 1 choice [ 1.227593] hub 4-0:1.0: USB hub found [ 1.227604] hub 4-0:1.0: 2 ports detected [ 1.227664] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.227673] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 1.227687] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 1.227713] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d080 [ 1.227757] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.227760] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.227762] usb usb5: Product: UHCI Host Controller [ 1.227765] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.227767] usb usb5: SerialNumber: 0000:00:10.3 [ 1.228151] usb usb5: configuration #1 chosen from 1 choice [ 1.228272] hub 5-0:1.0: USB hub found [ 1.228287] hub 5-0:1.0: 2 ports detected [ 1.352594] ata3.00: ATA-6: ST340810A, 3.39, max UDMA/100 [ 1.352599] ata3.00: 78165360 sectors, multi 16: LBA [ 1.368446] ata3.00: configured for UDMA/100 [ 1.392038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.598966] ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133 [ 1.598970] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.665641] ata1.00: configured for UDMA/133 [ 1.665783] scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5 [ 1.808013] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.868014] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.878947] scsi 2:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5 [ 1.991999] usb 3-1: New USB device found, idVendor=046d, idProduct=c069 [ 1.992010] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.992014] usb 3-1: Product: USB Laser Mouse [ 1.992016] usb 3-1: Manufacturer: Logitech [ 1.992228] usb 3-1: configuration #1 chosen from 1 choice [ 2.232379] ata4.00: ATAPI: SONY DVD RW DRU-800A, KC4B, max UDMA/66 [ 2.232420] ata4.01: ATAPI: LITE-ON COMBO SOHC-4836K, SQK5, max UDMA/44 [ 2.232449] ata4.00: limited to UDMA/33 due to 40-wire cable [ 2.232453] ata4.01: limited to UDMA/33 due to 40-wire cable [ 2.240014] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.248263] ata4.00: configured for UDMA/33 [ 2.280261] ata4.01: configured for UDMA/33 [ 2.283000] scsi 3:0:0:0: CD-ROM SONY DVD RW DRU-800A KC4B PQ: 0 ANSI: 5 [ 2.284499] scsi 3:0:1:0: CD-ROM LITE-ON COMBO SOHC-4836K SQK5 PQ: 0 ANSI: 5 [ 2.300370] b43-pci-bridge 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.319137] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0a.0 [ 2.326070] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.326140] sd 0:0:0:0: [sda] Write Protect is off [ 2.326144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.326172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.326353] sda: [ 2.326621] sd 2:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.326687] sd 2:0:0:0: [sdb] Write Protect is off [ 2.326690] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.326718] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.326888] sdb:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.332823] Uniform CD-ROM driver Revision: 3.20 [ 2.333328] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.339096] sr1: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray [ 2.339602] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 2.346952] sda2 sda3 < sdb1 sdb2 [ 2.351931] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.354743] sda5 sda6 > [ 2.367404] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.381126] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.381972] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.382704] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.383128] sr 3:0:1:0: Attached scsi generic sg3 type 5 [ 2.430099] usb 3-2: New USB device found, idVendor=046d, idProduct=c318 [ 2.430105] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.430108] usb 3-2: Product: Logitech Illuminated Keyboard [ 2.430111] usb 3-2: Manufacturer: Logitech [ 2.430294] usb 3-2: configuration #1 chosen from 1 choice [ 2.465453] usbcore: registered new interface driver hiddev [ 2.480529] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input0 [ 2.480744] generic-usb 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:10.1-1/input0 [ 2.483460] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1 [ 2.483600] generic-usb 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:10.1-2/input0 [ 2.487298] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input2 [ 2.488331] generic-usb 0003:046D:C318.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:10.1-2/input1 [ 2.488377] usbcore: registered new interface driver usbhid [ 2.488607] usbhid: v2.6:USB HID core driver [ 2.864888] kjournald starting. Commit interval 5 seconds [ 2.864903] EXT3-fs: mounted filesystem with ordered data mode. [ 4.252076] udev[336]: starting version 164 [ 4.764152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.775697] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 4.775713] ACPI: Sleep Button [SLPB] [ 4.775786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 4.775793] ACPI: Power Button [PWRB] [ 4.775862] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.775867] ACPI: Power Button [PWRF] [ 4.871066] udev[421]: renamed network interface eth1 to eth1-eth0 [ 4.883710] udev[348]: renamed network interface eth0 to eth1 [ 4.902247] processor LNXCPU:00: registered as cooling_device0 [ 4.921144] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 4.922531] udev[421]: renamed network interface eth1-eth0 to eth0 [ 4.976353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.051603] cfg80211: Using static regulatory domain info [ 5.051608] cfg80211: Regulatory domain: US [ 5.051610] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.051614] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 5.051617] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5.051620] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5.051622] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5.051625] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5.051628] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 5.052060] cfg80211: Calling CRDA for country: US [ 5.567759] [drm] Initialized drm 1.1.0 20060810 [ 5.773221] [drm] radeon kernel modesetting enabled. [ 5.773299] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.777780] [drm] radeon: Initializing kernel modesetting. [ 5.777887] [drm] register mmio base: 0xFF5F0000 [ 5.777889] [drm] register mmio size: 65536 [ 5.780931] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 5.781085] [drm] Generation 2 PCI interface, using max accessible memory [ 5.781096] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 5.781121] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 5.781200] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 5.781208] [drm] radeon: VRAM 64M [ 5.781211] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 5.781213] [drm] radeon: GTT 32M [ 5.781215] [drm] radeon: GTT from 0xFC000000 to 0xFDFFFFFF [ 5.781263] [drm] radeon: irq initialized. [ 5.781395] [drm] Detected VRAM RAM=64M, BAR=128M [ 5.781400] [drm] RAM width 128bits DDR [ 5.781501] [TTM] Zone kernel: Available graphics memory: 445470 kiB. [ 5.781503] [TTM] Zone highmem: Available graphics memory: 517026 kiB. [ 5.781527] [drm] radeon: 64M of VRAM memory ready [ 5.781530] [drm] radeon: 32M of GTT memory ready. [ 5.781767] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 5.781777] [drm] radeon: cp idle (0x10000C03) [ 5.781827] [drm] Loading R300 Microcode [ 5.782313] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 5.802512] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 5.926542] [drm] radeon: ring at 0x00000000FC000000 [ 5.926565] [drm] ring test succeeded in 1 usecs [ 5.932321] [drm] radeon: ib pool ready. [ 5.932417] [drm] ib test succeeded in 0 usecs [ 5.933096] [drm] Default TV standard: NTSC [ 5.933100] [drm] 27.000000000 MHz TV ref clk [ 5.933104] [drm] DFP table revision: 3 [ 5.933547] [drm] Default TV standard: NTSC [ 5.933550] [drm] 27.000000000 MHz TV ref clk [ 5.933616] [drm] Radeon Display Connectors [ 5.933619] [drm] Connector 0: [ 5.933621] [drm] VGA [ 5.933624] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 5.933626] [drm] Encoders: [ 5.933628] [drm] CRT1: INTERNAL_DAC1 [ 5.933630] [drm] Connector 1: [ 5.933631] [drm] DVI-I [ 5.933633] [drm] HPD1 [ 5.933635] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 5.933637] [drm] Encoders: [ 5.933639] [drm] CRT2: INTERNAL_DAC2 [ 5.933640] [drm] DFP1: INTERNAL_TMDS1 [ 5.933642] [drm] Connector 2: [ 5.933644] [drm] S-video [ 5.933645] [drm] Encoders: [ 5.933647] [drm] TV1: INTERNAL_DAC2 [ 6.093841] [drm] fb mappable at 0xF0040000 [ 6.093845] [drm] vram apper at 0xF0000000 [ 6.093848] [drm] size 5242880 [ 6.093849] [drm] fb depth is 24 [ 6.093851] [drm] pitch is 5120 [ 6.170952] Console: switching to colour frame buffer device 160x64 [ 6.203407] fb0: radeondrmfb frame buffer device [ 6.203411] registered panic notifier [ 6.206927] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 6.384794] phy0: Selected rate control algorithm 'minstrel' [ 6.385699] Registered led device: b43-phy0::tx [ 6.385719] Registered led device: b43-phy0::rx [ 6.385738] Registered led device: b43-phy0::radio [ 6.385839] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 6.479069] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 6.479232] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 8.940872] EXT3 FS on sda2, internal journal [ 9.069818] loop: module loaded [ 10.248330] kjournald starting. Commit interval 5 seconds [ 10.248585] EXT3 FS on sda6, internal journal [ 10.248591] EXT3-fs: mounted filesystem with ordered data mode. [ 10.327784] kjournald starting. Commit interval 5 seconds [ 10.328168] EXT3 FS on sdb1, internal journal [ 10.328175] EXT3-fs: mounted filesystem with ordered data mode. [ 11.123007] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 18.925929] fuse init (API version 7.13) [ 19.826385] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 19.826390] vboxdrv: Successfully done. [ 19.826393] vboxdrv: Found 1 processor cores. [ 19.827837] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.827842] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001). [ 21.520033] eth0: no IPv6 routers present