Your message dated Thu, 21 Oct 2010 17:08:19 +0200 with message-id <20101021150819.GA17418@debian.org> and subject line Re: Bug#567466: xserver-xorg-input-evdev: forgets xinput settings after resume from suspend has caused the Debian Bug report #567466, regarding xserver-xorg-input-evdev: forgets xinput settings after resume from suspend to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 567466: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567466 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-input-evdev: forgets xinput settings after resume from suspend
- From: Christoph Kluenter <christoph@kluenter.de>
- Date: Fri, 29 Jan 2010 10:22:33 +0100
- Message-id: <20100129092233.10777.84074.reportbug@teZ7i.inferno.nadir.org>
Package: xserver-xorg-input-evdev Version: 1:2.3.2-3 Severity: normal Since hal is not used anymore (Bug 564951), I have to set my EmulateWheel with xinput. I have to type this to use scrolling: xinput set-prop 10 "Evdev Wheel Emulation Button" 2 xinput set-prop 10 "Evdev Wheel Emulation" 1 But after resume, the settings are set to their default again. xinput before suspend: chris@teZ7i:~$ xinput list-props 10 Device '"TPPS/2 IBM TrackPoint"': Device Enabled (125): 1 Device Accel Profile (245): 0 Device Accel Constant Deceleration (246): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Evdev Reopen Attempts (243): 10 Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (133), "Rel Y" (134) Button Labels (254): "Button Left" (126), "Button Middle" (127), "Button Right" (128), "Button Wheel Up" (129), "Button Wheel Down" (130) Evdev Middle Button Emulation (255): 2 Evdev Middle Button Timeout (256): 50 Evdev Wheel Emulation (257): 1 Evdev Wheel Emulation Axes (258): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (259): 10 Evdev Wheel Emulation Timeout (260): 200 Evdev Wheel Emulation Button (261): 2 Evdev Drag Lock Buttons (262): 0 xinput after suspend: chris@teZ7i:~$ xinput list-props 10 Device '"TPPS/2 IBM TrackPoint"': Device Enabled (125): 1 Device Accel Profile (245): 0 Device Accel Constant Deceleration (246): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Evdev Reopen Attempts (243): 10 Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (133), "Rel Y" (134) Button Labels (254): "Button Left" (126), "Button Middle" (127), "Button Right" (128), "Button Wheel Up" (129), "Button Wheel Down" (130) Evdev Middle Button Emulation (255): 2 Evdev Middle Button Timeout (256): 50 Evdev Wheel Emulation (257): 1 Evdev Wheel Emulation Axes (258): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (259): 10 Evdev Wheel Emulation Timeout (260): 200 Evdev Wheel Emulation Button (261): 2 Evdev Drag Lock Buttons (262): 0 Cheers, Christoph -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx. 1 root root 13 Sep 22 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1864832 Jan 21 00:37 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1537 Jan 28 17:24 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: #Section "InputDevice" # Identifier "Generic Keyboard" # Driver "kbd" # Option "CoreKeyboard" # Option "XkbRules" "xorg" # Option "XkbModel" "pc105" # Option "XkbLayout" "de" # Option "XkbDisable" "boolean" # Option "xkb_layout" "de" # Option "XkbVariant" "nodeadkeys" #EndSection # #Section "InputDevice" # Identifier "Configured Mouse" # Driver "mouse" # Option "CorePointer" # Option "Device" "/dev/input/mice" # Option "Protocol" "ImPS/2" # Option "Emulate3Buttons" "true" # Option "EmulateWheel" "on" # Option "EmulateWheelButton" "2" #EndSection # Section "Device" Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" Option "NoAccel" "false" Option "DRI" "true" Option "AccelMethod" "UXA" Option "XvMC" "true" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 30-81 VertRefresh 50-160 EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 24 Virtual 2624 2048 Modes "1024x768@60" "1280x1024@60" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" # InputDevice "Generic Keyboard" # InputDevice "Configured Mouse" # Option "AutoAddDevices" "off" EndSection Section "ServerFlags" Option "DontVTSwitch" "Off" Option "DontZap" "Off" EndSection Xorg X server log files on system: -rw-r--r--. 1 root root 31905 Jan 19 2008 /var/log/Xorg.1.log -rw-r--r-- 1 root root 33463 Jan 29 10:08 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian Current Operating System: Linux teZ7i 2.6.32.6 #1 SMP PREEMPT Wed Jan 27 19:19:36 CET 2010 x86_64 Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32.6 root=/dev/mapper/lisa-root ro quiet services usbcore.autosuspend=1 vdso=0 vdso32=0 quiet Build Date: 20 January 2010 11:36:07PM xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 28 17:37:33 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller" (**) Option "DontVTSwitch" "Off" (**) Option "DontZap" "Off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x7c1600 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 8 (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 00@00:02:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "DRI" "true" (**) intel(0): Option "XvMC" "true" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (II) intel(0): Output VGA1 using monitor section Generic Monitor (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: LEN Model: 4000 Serial#: 0 (II) intel(0): Year: 2006 Week: 48 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 25 vert.: 18 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.585 redY: 0.335 greenX: 0.319 greenY: 0.529 (II) intel(0): blueX: 0.149 blueY: 0.135 whiteX: 0.312 whiteY: 0.328 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 54.2 MHz Image Size: 246 x 184 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 43.3 MHz Image Size: 246 x 185 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): N121X5-L06 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030ae004000000000 (II) intel(0): 3010010380191278eafe609555518726 (II) intel(0): 22505421080001010101010101010101 (II) intel(0): 01010101010128150040410026301888 (II) intel(0): 3600f6b800000018ed10004041002630 (II) intel(0): 18883600f6b9000000180000000f0061 (II) intel(0): 43326143280f01000daf0714000000fe (II) intel(0): 004e31323158352d4c303620202000ed (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1024x768"x50.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x40.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1024x768 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "dri2" (II) LoadModule: "dri2" (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) intel(0): DPMS enabled (**) intel(0): Intel XvMC decoder enabled (II) intel(0): Set up textured video (II) intel(0): [XvMC] i965_xvmc driver initialized. (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "NoAccel" is not used (WW) intel(0): Option "AccelMethod" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) intel(0): Allocate new frame buffer 1024x768 stride 1024 (II) config/udev: Adding input device "Power Button" (/dev/input/event2) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) "Power Button": always reports core events (**) "Power Button": Device: "/dev/input/event2" (II) "Power Button": Found keys (II) "Power Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device "Video Bus" (/dev/input/event3) (**) "Video Bus": always reports core events (**) "Video Bus": Device: "/dev/input/event3" (II) "Video Bus": Found keys (II) "Video Bus": Configuring as keyboard (II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device "Sleep Button" (/dev/input/event1) (**) "Sleep Button": always reports core events (**) "Sleep Button": Device: "/dev/input/event1" (II) "Sleep Button": Found keys (II) "Sleep Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event4) (**) "AT Translated Set 2 keyboard": always reports core events (**) "AT Translated Set 2 keyboard": Device: "/dev/input/event4" (II) "AT Translated Set 2 keyboard": Found keys (II) "AT Translated Set 2 keyboard": Configuring as keyboard (II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event5) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event5" (II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons (II) "TPPS/2 IBM TrackPoint": Found relative axes (II) "TPPS/2 IBM TrackPoint": Found x and y relative axes (II) "TPPS/2 IBM TrackPoint": Configuring as mouse (**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5 (**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE) (**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1 (**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0 (II) "TPPS/2 IBM TrackPoint": initialized for relative axes. (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/mouse0) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""TPPS/2 IBM TrackPoint"" (II) config/udev: Adding input device "ThinkPad Extra Buttons" (/dev/input/event6) (**) "ThinkPad Extra Buttons": always reports core events (**) "ThinkPad Extra Buttons": Device: "/dev/input/event6" (II) "ThinkPad Extra Buttons": Found keys (II) "ThinkPad Extra Buttons": Configuring as keyboard (II) XINPUT: Adding extended input device ""ThinkPad Extra Buttons"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event9) (**) "ACPI Virtual Keyboard Device": always reports core events (**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event9" (II) "ACPI Virtual Keyboard Device": Found keys (II) "ACPI Virtual Keyboard Device": Configuring as keyboard (II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch" (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "LEN", prod id 16384 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "TPPS/2 IBM TrackPoint": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) config/udev: removing device "TPPS/2 IBM TrackPoint" (II) "TPPS/2 IBM TrackPoint": Close (II) UnloadModule: "evdev" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/mouse0) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""TPPS/2 IBM TrackPoint"" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event5) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event5" (II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons (II) "TPPS/2 IBM TrackPoint": Found relative axes (II) "TPPS/2 IBM TrackPoint": Found x and y relative axes (II) "TPPS/2 IBM TrackPoint": Configuring as mouse (**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5 (**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE) (**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1 (**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0 (II) "TPPS/2 IBM TrackPoint": initialized for relative axes. (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "LEN", prod id 16384 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) "TPPS/2 IBM TrackPoint": Device reopened after 1 attempts. (II) config/udev: removing device "TPPS/2 IBM TrackPoint" (II) "TPPS/2 IBM TrackPoint": Close (II) UnloadModule: "evdev" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/mouse0) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""TPPS/2 IBM TrackPoint"" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event5) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event5" (II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons (II) "TPPS/2 IBM TrackPoint": Found relative axes (II) "TPPS/2 IBM TrackPoint": Found x and y relative axes (II) "TPPS/2 IBM TrackPoint": Configuring as mouse (**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5 (**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE) (**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1 (**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0 (II) "TPPS/2 IBM TrackPoint": initialized for relative axes. (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "LEN", prod id 16384 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) "TPPS/2 IBM TrackPoint": Device reopened after 1 attempts. (II) config/udev: removing device "TPPS/2 IBM TrackPoint" (II) "TPPS/2 IBM TrackPoint": Close (II) UnloadModule: "evdev" (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event5) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event5" (II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons (II) "TPPS/2 IBM TrackPoint": Found relative axes (II) "TPPS/2 IBM TrackPoint": Found x and y relative axes (II) "TPPS/2 IBM TrackPoint": Configuring as mouse (**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5 (**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE) (**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1 (**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0 (II) "TPPS/2 IBM TrackPoint": initialized for relative axes. (II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/mouse0) (**) "TPPS/2 IBM TrackPoint": always reports core events (**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""TPPS/2 IBM TrackPoint"" udev information: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:64 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1 N: input/event1 S: char/13:65 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:65 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 N: input/event2 S: char/13:66 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:66 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:67 P: /devices/platform/i8042/serio0/input/input4/event4 N: input/event4 S: char/13:68 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-0-event-kbd P: /devices/platform/i8042/serio1/input/input13/event5 N: input/event5 S: char/13:69 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input13/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/virtual/input/input6/event6 N: input/event6 S: char/13:70 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input6/event6 E: MAJOR=13 E: MINOR=70 E: DEVNAME=/dev/input/event6 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:70 P: /devices/pci0000:00/0000:00:1b.0/input/input7/event7 N: input/event7 S: char/13:71 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7/event7 E: MAJOR=13 E: MINOR=71 E: DEVNAME=/dev/input/event7 E: SUBSYSTEM=input E: ID_INPUT=1 E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:71 P: /devices/virtual/input/input9/event9 N: input/event9 S: char/13:73 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input9/event9 E: MAJOR=13 E: MINOR=73 E: DEVNAME=/dev/input/event9 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: XKBMODEL=pc105 E: XKBLAYOUT=de E: XKBVARIANT=nodeadkeys E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:73 DRM Information from dmesg: Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 [drm] set up 7M of stolen space [drm] LVDS-8: set mode 1024x768 c fb0: inteldrmfb frame buffer device [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [drm] LVDS-8: set mode 1024x768 c [drm] LVDS-8: set mode 1024x768 c [drm] LVDS-8: set mode 1024x768 c [drm] LVDS-8: set mode 1024x768 c -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (700, 'stable'), (670, 'testing'), (650, 'unstable'), (600, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32.6 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-input-evdev depends on: ii libc6 2.10.2-2 GNU C Library: Shared libraries ii udev 150-2 /dev/ and hotplug management daemo ii xserver-xorg-core 2:1.7.4-2 Xorg X server - core server xserver-xorg-input-evdev recommends no packages. xserver-xorg-input-evdev suggests no packages. -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Christoph Kluenter <christoph@kluenter.de>, 567466-done@bugs.debian.org
- Subject: Re: Bug#567466: xserver-xorg-input-evdev: forgets xinput settings after resume from suspend
- From: Cyril Brulebois <kibi@debian.org>
- Date: Thu, 21 Oct 2010 17:08:19 +0200
- Message-id: <20101021150819.GA17418@debian.org>
- In-reply-to: <20100129092233.10777.84074.reportbug@teZ7i.inferno.nadir.org>
- References: <20100129092233.10777.84074.reportbug@teZ7i.inferno.nadir.org>
Hi, Christoph Kluenter <christoph@kluenter.de> (29/01/2010): > But after resume, the settings are set to their default again. yes, that's intended. If you want to make sure they are applied when you resume, use a settings manager, like gpointing-device-settings. Closing this bug accordingly. (Hopefully that's going to make it into a X/Squeeze FAQ.) Mraw, KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---