[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

SATA disk detected as IDE?



Hello.

I have a SATA HD, installed as SATA HD (not as ide in motherboard) and
Debian squeeze detects me this as IDE.

What can I do for change his?

Appended there is is the output of hdparm and sdparm

Thanks
Josep

mail:/etc/modprobe.d# sdparm  --all /dev/sda
    /dev/sda: ATA       ST31500541AS      CC34
Read write error recovery mode page:
  AWRE        1
  ARRE        0
  TB          0
  RC          0
  EER         0
  PER         0
  DTE         0
  DCR         0
  RRC         0
  COR_S       0
  HOC         0
  DSOC        0
  WRC         0
  RTL         0
Caching (SBC) mode page:
  IC          0
  ABPF        0
  CAP         0
  DISC        0
  SIZE        0
  WCE         1
  MF          0
  RCD         0
  DRRP        0
  WRP         0
  DPTL        0
  MIPF        0
  MAPF        0
  MAPFC       0
  FSW         0
  LBCSS       0
  DRA         0
  NV_DIS      0
  NCS         0
  CSS         0
Control mode page:
  TST         0
  TMF_ONLY    0
  D_SENSE     0
  GLTSD       1
  RLEC        0
  QAM         0
  QERR        0
  RAC         0
  UA_INTLCK   0
  SWP         0
  ATO         0
  TAS         0
  AUTOLOAD    0
  BTP        -1
  ESTCT      30
mail:/etc/modprobe.d# 




mail:/etc/modprobe.d# 
mail:/etc/modprobe.d# hdparm  -iI /dev/sda

/dev/sda:

 Model=ST31500541AS, FwRev=CC34, SerialNo=XXXXXXXX
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=2930277168
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
 AdvancedPM=yes: unknown setting WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-4,5,6,7

 * signifies the current active mode


ATA device, with non-removable media
	Model Number:       ST31500541AS                            
	Serial Number:      XXXXXXXX
	Firmware Revision:  CC34    
	Transport:          Serial
Standards:
	Used: unknown (minor revision code 0x0029) 
	Supported: 8 7 6 5 
	Likely used: 8
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  268435455
	LBA48  user addressable sectors: 2930277168
	Logical/Physical Sector size:           512 bytes
	device size with M = 1024*1024:     1430799 MBytes
	device size with M = 1000*1000:     1500301 MBytes (1500 GB)
	cache/buffer size  = unknown
	Nominal Media Rotation Rate: 5900
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = ?
	Advanced power management level: 192
	Recommended acoustic management value: 254, current value: 0
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	DOWNLOAD_MICROCODE
	   *	Advanced Power Management feature set
	    	Power-Up In Standby feature set
	    	SET_FEATURES required to spinup after power up
	    	SET_MAX security extension
	   *	Automatic Acoustic Management feature set
	   *	48-bit Address feature set
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	   *	64-bit World wide name
	    	Write-Read-Verify feature set
	   *	WRITE_UNCORRECTABLE_EXT command
	   *	{READ,WRITE}_DMA_EXT_GPL commands
	   *	Segmented DOWNLOAD_MICROCODE
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Phy event counters
	    	Device-initiated interface power management
	   *	Software settings preservation
	   *	SMART Command Transport (SCT) feature set
	   *	SCT Long Sector Access (AC1)
	   *	SCT LBA Segment Access (AC2)
	   *	SCT Error Recovery Control (AC3)
	   *	SCT Features Control (AC4)
	   *	SCT Data Tables (AC5)
	    	unknown 206[12] (vendor specific)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
		supported: enhanced erase
	328min for SECURITY ERASE UNIT. 328min for ENHANCED SECURITY ERASE
UNIT.
Logical Unit WWN Device Identifier: 5000c5001b7ea807
	NAA		: 5
	IEEE OUI	: 000c50
	Unique ID	: 01b7ea807
Checksum: correct
mail:/etc/modprobe.d# 




Reply to: