On Saturday, 12 June 2010 14:41:53 -0300, Daniel Bareiro wrote: > However, in the operating system I'm only seeing the tape drive, but > not the autochanger: > > backup:~# cat /proc/scsi/scsi > Attached devices: > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3160211AS Rev: 3.AA > Type: Direct-Access ANSI SCSI revision: 05 > > > But I'm not seeing a /dev/st0 or /dev/nst0 device. Now that I see, this has nothing to do with the tape drive: ------------------------------------------------------------------------- backup:~# smartctl -i /dev/sda smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 family Device Model: ST3160211AS Serial Number: 6PT56S0F Firmware Version: 3.AAE User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Jun 12 14:49:31 2010 ART SMART support is: Available - device has SMART capability. SMART support is: Disabled SMART Disabled. Use option -s with argument 'on' to enable it. ------------------------------------------------------------------------- It is the SATA disk, so this is consistent with that I didn't find the special file for the tape drive. Also, if it were the tape drive type should be 'Sequential-Access'. Regards, Daniel -- Fingerprint: BFB3 08D6 B4D1 31B2 72B9 29CE 6696 BF1B 14E6 1D37 Powered by Debian GNU/Linux Lenny - Linux user #188.598
Attachment:
signature.asc
Description: Digital signature