virtualbox: Install from backup DVD HP Pavilion
Hi there,
I am trying to install a WinXP in my virtualbox from the backup DVD
I made on my HP Pavilion just before installing Linux. Unfortunately
quickly after booting fro, the 1st DVD it says:
"Ce PC n'est pas pris en charge par les disques de réinstallation du
système. Ces disques ne vous permettront pas de poursuivre la
réinstallation du système"
Which basically translate to:
"This PC is not supported by the discs of the system reinstall. These
discs will not allow you to continue the reinstallation of the system"
Does anyone knows how to debug this ? I tried looking at the
virtualbox log, but I cannot find anything usefull. Extract:
...
00:00:02.094 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:02.112 Guest Log: BIOS: VirtualBox 3.0.6_OSE
00:00:02.112 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:02.191 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1
usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:02.191 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:02.193 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:02.194 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1
usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:02.194 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:02.195 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:02.208 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=640 h=480 bpp=32 cbLine=0xA00
00:00:03.611 Guest Log: Key pressed: 0086
00:00:03.618 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:00:08.381 Guest Log: Key pressed: 002e
00:00:08.389 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:08.499 Guest Log: BIOS: Booting from CD-ROM...
00:00:13.728 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=1024 h=768 bpp=32 cbLine=0x1000
00:00:13.868 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:01:15.648 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=1024 h=768 bpp=24 cbLine=0xC00
00:01:52.913 Guest Log: BIOS: int13_diskette: unsupported AH=41
00:02:26.265 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:02:27.930 PIT: mode=2 count=0x2ead (11949) - 99.85 Hz (ch=0)
CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:02:28.418 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=640 h=480 bpp=0 cbLine=0x140
00:02:39.548 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=800 h=600 bpp=32 cbLine=0xC80
00:02:43.857 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:02:43.898 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=800 h=600 bpp=32 cbLine=0xC80
00:03:23.298 Changing the VM state from 'RUNNING' to 'RESETTING'.
00:03:23.388 CPUMSetGuestCpuIdFeature: Enabled APIC
00:03:23.388 CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:03:23.388 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:03:23.394 PIIX3 ATA: Ctl#0: finished processing RESET
00:03:23.394 PIIX3 ATA: Ctl#1: finished processing RESET
00:03:23.394 Audio: set_record_source ars=0 als=0 (not implemented)
00:03:23.394 Changing the VM state from 'RESETTING' to 'RUNNING'.
00:03:23.399 Guest Log: BIOS: VirtualBox 3.0.6_OSE
00:03:23.399 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:03:23.422 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0xc8 (-1
usec ago) CmdIf1=0x00 (-1 usec ago)
00:03:23.422 PIIX3 ATA: Ctl#0: finished processing RESET
00:03:23.424 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:03:23.425 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0xa0 (-1
usec ago) CmdIf1=0x00 (-1 usec ago)
00:03:23.425 PIIX3 ATA: Ctl#1: finished processing RESET
00:03:23.426 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:03:23.438 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=640 h=480 bpp=32 cbLine=0xA00
00:03:25.870 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:03:25.875 Guest Log: BIOS: Booting from CD-ROM...
00:03:25.884 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:03:30.983 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=1024 h=768 bpp=32 cbLine=0x1000
00:03:31.007 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:04:30.608 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=1024 h=768 bpp=24 cbLine=0xC00
00:05:00.655 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:05:08.581 Guest Log: BIOS: int13_diskette: unsupported AH=41
00:05:43.769 PIT: mode=2 count=0x2ead (11949) - 99.85 Hz (ch=0)
CPUMSetGuestCpuIdFeature: Disabled x2APIC
00:05:44.223 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=640 h=480 bpp=0 cbLine=0x140
00:05:54.508 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=800 h=600 bpp=32 cbLine=0xC80
00:05:58.456 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0
00:05:58.518 Display::handleDisplayResize(): uScreenId = 0,
pvVRAM=00007f0114b0e000 w=800 h=600 bpp=32 cbLine=0xC80
00:14:13.281 Changing the VM state from 'RUNNING' to 'SUSPENDED'.
00:14:14.707 Console::powerDown(): A request to power off the VM has
been issued (mMachineState=8, InUninit=0)
00:14:14.723 ****************** Guest state at power off ******************
...
Thanks for any pointers !
--
Mathieu
Reply to: