Le Wednesday 27 February 2008 19:39:10 Rob Heilman, vous avez écrit : > I have seen/used a couple different ways to setup Ethernet bonding and > subsequently 802.1q vlans on top of the bond. Just curious if anyone > knows the "Debian" way of doing this? Right now I use entries in > > /etc/modules > 8021q > > /etc/modprobe.d/arch/i386 > alias bond0 bonding > options bond0 mode=1 miimon=100 primary=eth0 > > /etc/network/interfaces > auto bond0 > iface bond0 inet static > address 192.168.0.77 > netmask 255.255.255.0 > network 192.168.0.0 > broadcast 192.168.0.255 > gateway 192.168.0.1 > up /sbin/ifenslave bond0 eth1 eth0 > auto bond0.20 > iface bond0.20 inet static > address 192.168.1.77 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > pre-up /sbin/vconfig add bond0 20 > > but I am always open to other ideas. More importantly I like to stay in > the Debian mold as I can for supportability and to avoid surprises > during upgrades. If there is a Debian supported method of accomplishing > the same thing please share. > > Thanks. > > -rh All of this seems good to me. Personaly, I prefer to create a new file /etc/modprobe.d/bonding for the bonding module configuration. Considering VLans, I must apology, I have never used Vlans on my servers.
Description: This is a digitally signed message part.