Re: alsaconf needed every boot
On Fri, 12 Jan 2007 22:51:30 -0800
"Francisco Zabala" <firstname.lastname@example.org> wrote:
> > the module in /etc/modules file, but this fails. The required
> > module is snd-intel8x0. I'm using Debian Etch, with KDE.
For me it just worked. I just installed alsa-base and alsa-utils.
> I just went through the same issue and got it solved. The problem is
> that alsaconf uses a dynamic dev for the snd configuration (via udev)
> instead of a static /dev/snd. Additionally, Etch does not bring the
> latest and greatest version of udev (I believe it only includes
> hotplug, could be wrong here), but anyway, with an apt-get install
Etch ships with udev by default. sarge has hotplug.
> udev you should be on your way (in my case I had to remove hotplug and
> use udev, but the apt-get will tell you).
> Once this is done, do the good ol' process of executing ./snddevices
> (inside the /usr/share/alsa-base directory)
> Then, alsaconf
> Finally, update your alsamixer and save with alsactl store
Mark: please specify the alsa packages you have installed.
If you can't explain it simply, you don't understand it well enough.