Re: can some one answer this please
really thanks for your help.I can remove and install the scsi card in other slot after that i will reboot the machine then it should detect my scsi card am i correct or i need to do anything once rebooted.If i want to install or rescan the scsi devices in my machine what command or how do i do that.
listrcv <listrcv@condor-werke.com> wrote:
david robert wrote:
> hi,
>
> i have installed a scsi card when i first install debian and after that i have replaced the scsi card with the same type of scsci card now i am getting the following error in my syslog i think because of the scsi card chaged
>
> Mar 17 00:10:23 localhost kernel: scsi0:0:6:0: Device is active,
>
>>asserting ATN
>>Mar 17 00:10:23 localhost kernel: Recovery code sleeping
>>Mar 17
00:10:28 localhost kernel: Recovery code awake
>>Mar 17 00:10:28 localhost kernel: Timer Expired
>>Mar 17 00:10:28 localhost kernel: aic7xxx_abort returns 0x2003
>>Mar 17 00:10:28 localhost kernel: scsi0:0:6:0: Attempting to queue a
>>TARGET RESET message
>>Mar 17 00:10:28 localhost kernel: CDB: 0xa 0x0 0x0 0xfc 0x0 0x0
>>Mar 17 00:10:28 localhost kernel: aic7xxx_dev_reset returns 0x2003
>>Mar 17 00:10:28 localhost kernel: Recovery SCB completes
>>Mar 17 00:10:33 localhost kernel: scsi: device set offline - not
>
> ready
>
>>or command retry failed after bus reset: host 0 channel 0 id 6 lun 0
>>Mar 17 00:10:33 loc alhost kernel: st 0: Error 10000 (sugg. bt 0x0,
>>driver bt 0x0, host bt 0x1).
>
>
> please help me how to fix this problem
Try to put the card into another slot or remove it from the slot it is
installed in and reinstall
it. Reroute the SCSI cabling and make sure
the cable is correctly terminated. Verify that the power supply to the
SCSI drives is in excellent condition; try not to connect several drives
to one power connector line and avoid using (additional) Y-connectors.
Try out if the old card still works. Check the number of commands that
can be queued in the settings of the SCSI driver and eventually reduce
the number.
If you have several cards installed, remove them as far as possible and
try if it works. If it does, reinstall the other cards one after another
to find out if there's some card that interferes with the SCSI controller.
GH
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre.
Reply to: