Re: failing to connect with PPP in austria
martin f krafft said:
> mh, not really, since I cannot connect -- I am in an Internet cafe now. It
> receives an LCP packet mentioning CHAP and MD5, then sends one mentioning
> CHAP and MD5, then reports the error and tries again several times.
Ah, the wonders of USB sticks...
pppd[11426]: pppd 2.4.3 started by madduck, uid 1000
chat[11427]: abort on (BUSY)
chat[11427]: abort on (VOICE)
chat[11427]: abort on (NO CARRIER)
chat[11427]: abort on (NO DIALTONE)
chat[11427]: abort on (NO DIAL TONE)
chat[11427]: send (ATZ^M)
chat[11427]: expect (OK)
chat[11427]: ATZ^M^M
chat[11427]: OK
chat[11427]: -- got it
chat[11427]: send (ATDT0718917180110^M)
chat[11427]: expect (CONNECT)
chat[11427]: ^M
chat[11427]: ATDT0718917180110^M^M
chat[11427]: CONNECT
chat[11427]: -- got it
chat[11427]: send (^M)
pppd[11426]: Serial connection established.
pppd[11426]: using channel 4
pppd[11426]: Using interface ppp0
pppd[11426]: Connect: ppp0 <--> /dev/modem
pppd[11426]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x800a298e>
<pcomp> <accomp>]
pppd[11426]: rcvd [LCP ConfReq id=0x1 <mru 1514> <asyncmap 0x0> <auth chap
MD5> <magic 0xcdc9526> <pcomp> <accomp>]
pppd[11426]: No auth is possible
pppd[11426]: sent [LCP ConfRej id=0x1 <auth chap MD5>]
pppd[11426]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x800a298e>
<pcomp> <accomp>]
pppd[11426]: rcvd [LCP ConfReq id=0x2 <mru 1514> <asyncmap 0x0> <auth eap>
<magic 0xcdc9526> <pcomp> <accomp>]
pppd[11426]: No auth is possible
pppd[11426]: sent [LCP ConfRej id=0x2 <auth eap>]
pppd[11426]: rcvd [LCP ConfReq id=0x3 <mru 1514> <asyncmap 0x0> <auth chap
MS> <magic 0xcdc9526> <pcomp> <accomp>]
pppd[11426]: No auth is possible
pppd[11426]: sent [LCP ConfRej id=0x3 <auth chap MS>]
pppd[11426]: rcvd [LCP ConfReq id=0x4 <mru 1514> <asyncmap 0x0> <auth pap>
<magic 0xcdc9526> <pcomp> <accomp>]
pppd[11426]: No auth is possible
pppd[11426]: sent [LCP ConfRej id=0x4 <auth pap>]
pppd[11426]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x800a298e>
<pcomp> <accomp>]
pppd[11426]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x800a298e>
<pcomp> <accomp>]
pppd[11426]: rcvd [LCP ConfReq id=0x5 <mru 1514> <asyncmap 0x0> <auth pap>
<magic 0xcdc9526> <pcomp> <accomp>]
pppd[11426]: No auth is possible
pppd[11426]: sent [LCP ConfRej id=0x5 <auth pap>]
pppd[11426]: Terminating on signal 2
pppd[11426]: sent [LCP TermReq id=0x2 "User request"]
pppd[11426]: rcvd [LCP TermAck id=0x2]
pppd[11426]: Connection terminated.
pppd[11426]: Exit.
thanks for any help!
-martin
Reply to: