usb camera on 100% scsi machine
Hi there.
I'm trying to read the flash memory from my digital camera without success.
This is the scenario:
linux-2.6.11.7
100% SCSI machine (4 discs - sda, sdb, sdc, sdd)
root@gothicdoom:~# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.11.7 uhci_hcd
S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB
S: SerialNumber=0000:00:0c.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=040a ProdID=0570 Rev= 1.00
S: Manufacturer=Eastman Kodak Company
S: Product=KODAK EasyShare DX6340 Zoom Digital Camera
S: SerialNumber=KCKCJ35213065
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
root@gothicdoom:~# mount
/dev/sda4 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
/dev/sda2 on /boot type ext3 (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sdb1 on /mnt/tmp type reiserfs (rw)
/dev/sdc3 on /mnt/misc type ext3 (rw)
/dev/sr0 on /mnt/cdrom type iso9660 (ro,nosuid,nodev)
I've already mounted this kind of device on an IDE machine, but the
same procedure isn't working here.
Thanks for your time.
Reply to: