cdrecord issues since 2.6 move
Help!
Running Debian Sid on Dell Inspiron 8200. Moved to Kernel 2.6.8 and
started having failures.
Cdwriter:
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) *
0,1,0 1) 'TEAC ' 'CD-W216E ' 'L.0Q' Removable CD-ROM
####
Cdwriting fails on ISOs greater then 150MB.
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W216E '
Revision : 'L.0Q'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1493520 = 1458 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 697 MB
Total size: 801 MB (79:23.90) = 357293 sectors
Lout start: 801 MB (79:25/68) = 357293 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2553
Starting to write CD/DVD at speed 16 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 259 of 697 MB written (fifo 100%) [buf 85%] |255 212ms|
2.5x.cdr ecord: Success. write_g1: scsi sendcmd: no errorCDB: 2A 00 00 02 06 0A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 40s
write track data: error after 271601664 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 07 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in progress)
Fru 0 x0Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: Success. flush cache: scsi sendcmd: no error
CDB: 35 02 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 13 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 4.638s timeout 120s
Trouble flushing the cache
Writing time: 180.834s
Average write speed 27.7x.
Min drive buffer fill was 73%
Fixating...
Fixating time: 30.112s
cdrecord: fifo had 4342 puts and 4279 gets.
cdrecord: fifo was 0 times empty and 2179 times full, min fill was 92%.
--
Kevin C. Smith
Reply to: