Re: problem loading ide-scsi module
On Sat, 2003-11-29 at 22:02, dooble M wrote:
> hi everybody, I'm new on this list !
> I'm runing with woody and i'm trying to use my ide cd-burner.
> Since I read that I need scsi emulation to make it work, I just
> recompiled my kernel (2.4.22 with make-kpkg) with sg, sr, ide-scsi, and
> without ide-cd, all as modules.
> My burner is hdd, so I added the line: append="hdd=ide-scsi" to my
> lilo.conf (and ran lilo after).
> The kernel is working well, when I run modconf and add the scsi_mod,
> sr_mod and sg modules, the modules are loaded normaly and i see them
> with lsmod:
> # lsmod
> Module Size Used by Not tainted
> isofs 18764 0 (autoclean)
> snd-pcm-oss 39716 0 (autoclean) (unused)
> snd-pcm 60740 0 (autoclean) [snd-pcm-oss]
> snd-timer 15268 0 (autoclean) [snd-pcm]
> snd-page-alloc 6228 0 (autoclean) [snd-pcm]
> snd-mixer-oss 13592 0 (autoclean) [snd-pcm-oss]
> autofs4 10324 2 (autoclean)
> snd 29476 0 [snd-pcm-oss snd-pcm snd-timer
> soundcore 3876 0 [snd]
> nls_iso8859-1 2844 2 (autoclean)
> vfat 10828 1 (autoclean)
> fat 32728 0 (autoclean) [vfat]
> serial 46788 0 (autoclean)
> sg 28924 0 (unused)
> sr_mod 14328 0 (unused)
> scsi_mod 58804 2 [sg sr_mod]
> cdrom 29248 0 [sr_mod]
> parport_pc 13700 1 (autoclean)
> lp 6496 0 (unused)
> parport 14688 1 [parport_pc lp]
> af_packet 10600 0 (unused)
> but when I try to load the module ide-scsi with modconf, I get an
> installation failed, and a few seconds after, a lot of code with
> something like that at the end:
> Code: Bad EIP Value
> Kernel panic: aiee...........
> then my system freezes and i'm forced to push the reset button.
> I already made a lot of researches over the web, without success.
> Help !!
> Thanks in advance and sorry for my english.
> dooble M
There were a similar thread some days ago. I *think* the problem was a
known issue with the kernel 2.4.22. Check the archives for this or give
2.4.23 a try.