Re: xcdroast coasters
nate wrote:
so from my understanding of what you said above your understanding of
the buffer is backwards. Next time you burn a CD can you include the
full output of whats in the 'details' section of X cdroast? it prints
out a buncha stuff which I think you can just highlight and middle
click to another app to paste. from your original email it looked to
me like the burn went successfully with 0 errors.
I did a "dummy" run and it's still failing...
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev=0,1,0 gracetime=2
fs=16384k -v -useinfo speed=4 -dao -dummy -eject -pad -data
"/tmp/track-01.img" ...
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
pregap1: -1
Cdrecord 2.01a07 (i686-pc-linux-gnu) Copyright (C) 1995-2003 J?rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'RICOH '
Identifikation : 'CD-R/RW MP7040A '
Revision : '1.1j'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 16777216 = 16384 KB
Track 01: data 246 MB padsize: 30 KB
Total size: 283 MB (28:02.88) = 126216 sectors
Lout start: 283 MB (28:04/66) = 126216 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: 233365 (151:52/115)
ATIP start of lead out: 551140 (121:89/115)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 233632
Starting to write CD/DVD at speed 4 in dummy SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 D2 B4 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0C 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.237s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
write track data: error after 110469120 bytes
Writing time: 221.508s
Average write speed 7.6x.
Min drive buffer fill was 100%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.003s
cdrecord: fifo had 1995 puts and 1741 gets.
cdrecord: fifo was 0 times empty and 1730 times full, min fill was 98%.
--
If God had intended Man to Smoke, He would have set him on Fire.
Reply to: