[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: IDE CD burning problem



Disable DMA on the drive.

On Fri, 2001-10-05 at 02:36, Petteri Heinonen wrote:
> Hello.
> I've tried to set up my IDE burner, following instructions in
> CD writing howto. I've compiled all necessary stuff in the
> kernel (2.4.9), except modules ide-cd , ide-scsi and ide-loop.
> I can load modules fine, and cdrecord -scanbus shows my
> burner. But burning itself fails. I might be able to burn
> couple of megs (maximum has been 9 megs), but then everything
> freezes. I have to use reset button to recover. Here is the
> output of cdrecord -v speed=2 dev=0,1,0 -data ./test.iso:
> 
> Track 01: 3 of 44 MB written.scsi:aborting command due
> timeout: pid:0, scsi0,
> 	id 0, lun 0 0x2a 00 00 00 01 b2 00 00 1f 00
> hdb: timeout waiting for DMA
> ide_dmaproc: chipset supported ide_dam_timeout func only: 14
> hdb: status timeout: status=0xd0 {Busy}
> hdb: drive not ready for command
> hdb: ATAPI reset complete
> Unable to handle kernel paging request at virtua address
> bdefae5e
>     (then about ten rows of hex garbage or something)
> Kernel panic: Aiee, killing interrupt handler!
> In interrupt handler - not syncing
> 
> After that the box is completely freezed. I think everything
> goes fine until burning process itself begins, so I don't
> bother you with the output of cdrecord before that. But if you
> think that there could be something essential in cdrecord's
> output before burning phase, let me know, and I'll send you
> that output too. One thing that could help to figure out what
> is going wrong is that I am able to _clear_ CD-RW:s. But
> writing is not possible for either CD-R's nor CD-RW's. I'm not
> sure about the exact model of my drive, but idetool says
> following:
> 
> Model		IDE-CD ReWritable-2x2x6
> Firmware	V:003.01
> Serial No.	4VI22990
> Geometry	0/0/0
> Cache		3900Kb
> Status		Unknown
> DMA Mode	Enabled
> IO Mode		Default 16-bit
> IRQ Unmask	Disabled
> Multisector	Yes/134537789 sectors)
> On Reset	Default
> 
> thanks in advance,
> -- 
> Petteri Heinonen			tel:	+358 50 3363286
> email:	heinonep@cs.tut.fi		addr:	Varvikonkatu 1 C 19
> 						33820 Tampere FIN
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
-- 
Help protect your rights on-line.
Join the Electronic Frontiers Foundation today: http://www.eff.org/join
-----------------------------------------------------------------------
Security: Antonyms: See Microsoft
-----------------------------------------------------------------------
"We are coming after you. God may have mercy on you, but we won't,"
declared Sen. John McCain, R-Arizona.



Reply to: