ADSL

["Patrick Kirk" <patrick@kirks.net>]

What a bear this installation is!  ´Kernel patches.  Lots of new apps all of
which seem to be in beta...

So my machine boots, sees the USB device but doesn't load the correct
driver.  I wonder why?  Please take a look and let me know if dmesg is any
help.

Linux version 2.4.4 (root@enterprise) (gcc version 2.95.4 20010506 (Debian
prerelease)) #5 Fri May 25 12:03:43 BST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 0000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 BOOT_FILE=/vmlinuz
Initializing CPU#0
Detected 200.459 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.76 BogoMIPS
Memory: 126236k/131072k available (1311k kernel code, 4448k reserved, 517k
data, 204k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfb070, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/0585] at 00:00.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'Plug & Play Ethernet Card'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
block: queued sectors max/low 83826kB/27942kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
hda: QUANTUM FIREBALL SE8.4A, ATA DISK drive
hdd: CDM-T531 Ver 1.041, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/80KiB Cache, CHS=1027/255/63
hdd: ATAPI 18X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 < hda5 > hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux Tulip driver version 0.9.14e (April 20, 2001)
tulip0: 21041 Media table, default media 0800 (Autosense).
tulip0:  21041 media #0, 10baseT.
tulip0:  21041 media #4, 10baseT-FDX.
tulip0:  21041 media #1, 10base2.
eth0: Digital DC21041 Tulip rev 33 at 0x6200, 21041 mode, 00:80:C8:E4:36:49,
IRQ 10.
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20000928 on minor 63
[drm:radeon_init] *ERROR* Cannot initialize agpgart module.
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding Swap: 48188k swap-space (priority -1)
Adding Swap: 72256k swap-space (priority -2)
uhci.c: USB UHCI at I/O 0x6100, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0x6300, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus2/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active
driver.
usb.c: USB disconnect on device 2