Re: i810 and potato X
hi ya lee...
you need to use XFree-4.x or XFCom_i810 from intel for Xfree-3.3.x
you need to also install the agpgart.o modules
here's mroe info/patches/howtos
http://www.linux-1u.net/MotherBoard/*X11*
have fun
alvin
http://www.linux-1u.net....1U Raid5...3-5 Nics in 1U...
On Sun, 12 Nov 2000, Lee Bradshaw wrote:
> I'm trying to install debian on my wife's computer. She wants to use
> the gimp, but maybe she'll eventually like the whole setup. Her system
> has an i810 chipset. I'm installing debian potato off cd's from linux
> central. I downloaded 2.2.18pre19, compiled a new kernel with agpgart as
> a module, created /dev/agpgart, modprobe'd agpgart, and tried using the
> xserver-svga package. I get the following errors from startx (rest of
> log at end of message):
>
> (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @ 0xf8000000, 0xf4000000
> (--) SVGA: error doing ioctl(GARTIOCINFO): Invalid argument
>
> Should I be using a different agpgart than the one included with the
> 2.2.18pre19 kernel? If anyone has a working XF86Config file, I'd
> appreciate a copy. I forgot to copy her XF86Config before she rebooted
> into windows, if the start log and the rest of this info isn't enough,
> I'll send that later.
>
> Would a newer xserver-svga help? I noticed 3.3.6-11 is now available,
> although that's not the version on the cd's.
>
> What board should I select in XF86Setup? I used generic VGA or SVGA
> (don't remember exactly) to get the vga16 xserver working, but that's
> not enough colors or resolution for editing photos.
>
> I tried searching the archive, but some of the references seemed to be
> to software outside debian. According the the debian docs and the X
> strike force page, it seems like the potato X should support i810
> without external software. Any suggestions would be welcome.
>
> Thanks,
> Lee
>
> uname -r
> 2.2.18pre19
>
> lspci
> 00:00.0 Host bridge: Intel Corporation 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
> 00:01.0 VGA compatible controller: Intel Corporation 82810 CGC [Chipset Graphics Controller] (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801 82810 PCI Bridge (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801 82810 Chipset ISA Bridge (LPC) (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801 82810 Chipset IDE (rev 02)
> 00:1f.2 USB Controller: Intel Corporation 82801 82810 Chipset USB (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801 82810 Chipset SMBus (rev 02)
> 01:09.0 Multimedia audio controller: Cirrus Logic: Unknown device 6005 (rev 01)
> 01:0d.0 Ethernet controller: Bridgecom, Inc: Unknown device 0985 (rev 11)
> 01:0e.0 Communication controller: CONEXANT HSP MicroModem 56K (rev 01)
>
> ls -l /dev/agpgart
> crw-r--r-- 1 root root 10, 175 Nov 11 18:51 /dev/agpgart
>
> lsmod
> Module Size Used by
> agpgart 13724 0 (autoclean)
>
> startx
> XFree86 Version 3.3.6 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: January 8 2000
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.17pre10 i686 [ELF]
> Configured drivers:
> SVGA: server for SVGA graphics adaptors (Patchlevel 1):
> NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
> RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
> GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
> ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
> ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
> wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
> sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
> sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
> tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
> tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
> tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
> tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
> cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
> clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
> clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
> clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
> clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
> mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
> oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
> ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
> ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,
> AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
> ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
> ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
> ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
> i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "us"
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> (**) Mouse: buttons: 3
> (**) SVGA: Graphics device ID: "Primary Card"
> (**) SVGA: Monitor ID: "Primary Monitor"
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi"
> (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @ 0xf8000000, 0xf4000000
> (--) SVGA: error doing ioctl(GARTIOCINFO): Invalid argument
>
> Fatal server error:
> Aborting
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> X connection to :0.0 broken (explicit kill or server shutdown).
>
>
> --
> Lee Bradshaw lee@sectionIV.com (preferred)
> Texas Instruments bradshaw@ti.com
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Reply to: