--- Begin Message ---
Linux version 2.2.12 (root@crashtest) (gcc version 2.7.2.3) #2 Thu Aug 26 11:46:26 PDT 1999
Detected 451033251 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 450.56 BogoMIPS
Memory: 62876k/65536k available (1244k kernel code, 416k reserved, 900k data, 100k init)
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb460
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
hdd: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALLP KA13.6, 13216MB w/371kB Cache, CHS=1684/255/63
hdd: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
NCR53c406a: no available ports found
Failed initialization of WD-7000 SCSI card!
megaraid: v1.04 (August 16, 1999)
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 100k freed
Adding Swap: 200772k swap-space (priority -1)
parport0: PC-style at 0x378 [SPP,PS2]
lp0: using parport0 (polling).
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
PPP BSD Compression module registered
tulip.c:v0.89H 5/23/98 becker@cesdis.gsfc.nasa.gov
eth0: Macronix 98715 PMAC at 0xe400, 00 80 c6 f1 68 fa, IRQ 10.
eth0: EEPROM default media type 10baseT.
Unable to handle kernel NULL point dereference at virtual address 00000000 current->tss.cr3 = 03d63000, %cr3 = 03d63000
--- End Message ---