Re: Problem to burn cd with cdrecord

[hubert.fauque@wanadoo.fr]

"Markus Jaekel" <markus.jaekel@gmx.net> writes:

> Hallo!
> 
> After creating an ISO-Image with mkisofs I would like
> to burn it on CDR. I start a test with
> cdrecord dev=6,0 speed=4 -v -dummy -multi image.iso  
> without any errors.
> 
> When I do it without the -dummy option I get the following output:
> 
> cdrecord: Eingabe-/Ausgabefehler. philips write_track: scsi sendcmd: retryable error
> CDB:  E6 00 00 00 00 00 02 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
> Sense Key: 0x6 Unit Attention, Segment 0
> Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
> Sense flags: Blk 0 (not valid) 

I sent a message on the list some time ago for a similar problem;
here is the output I get:
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 28 00 07 F3 17 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (valid) 
cmd finished after 0.016s timeout 480s

I had thought of a problem in the SCSI driver;
I m using an adaptec 2940 SCSI card with the aic7xxx driver;
what card are you using?


Hubert