RE: FYI: DMA/33 and kernels
> On Tue, 13 Oct 1998, Kenneth Scharf wrote:
> > just a few ideas.....
> > is your hd the slave or master, and if the master is there a slave
> > connected to the same cable?
> It doesn't matter. I have tried it as master, slave, master with a slave
> and master alone ... no change.
Many drives have three jumper settings: (1)Single, (2)Master, (3)Slave.
If your drive is like this, you will probably need to set the jumper
from `Master' to `Single' if you want to start your system with only
that drive installed.