Re: Remote printer configuration
your set up looks fine (we have the same set up as you here at our office,
JetDirect's work fine with the Debian/Linux lpr package). What you need
to do to get rid of that banner page is to telnet to the JetDirect
box and disable the banner page:
canaima:~# telnet hplj4p
Connected to hplj4p.ven.ra.rockwell.com.
Escape character is '^]'.
Please type [Return] two times, to initialize telnet configuration
For HELP type "?"
===JetDirect Parameters Configured===
IP Address : 188.8.131.52
Subnet Mask : 255.255.255.128
Default Gateway : 184.108.40.206
Syslog Server : 0.0.0.0
Idle Timeout : 90 Seconds
Set Cmnty Name : Not Specified
DHCP Config : Disabled
Passwd : Disabled
Novell : Enabled
DLC/LLC : Disabled
Ethertalk : Disabled
Banner page : Disabled
Connection closed by foreign host.
Of course, you should do "telnet 220.127.116.11". Type "?" when you are logged in to you JetDirect to get help.
Hope this helps.
Carlo U. Segre (firstname.lastname@example.org) wrote:
: ls178_hp4m|First Floor Department LaserJet:\
: The rp=text is required to give the proper CRLF sequence when printing
: text files from Linux. The printer is set up to autoswitch to postscript
: and PCL and this works fine. The problem is that every job I print has a
: trailer page with the information about where the print job came from.
: Is this a feature of the Linux lpd? I haven't been able to find anything
: in the printer documents aobut this so I need to knowif anyone has heard
: of this in Linux. I looked in the Linux docs but no mention there either.
Eloy A. Paris
Information Technology Department
Rockwell Automation de Venezuela
Telephone: +58-2-9432311 Fax: +58-2-9430323
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
Trouble? e-mail to email@example.com .