Re: Otra mas de "no inician las X" (advertencia post largo)
On Miércoles 18 Noviembre 2009 18:30:16 Hector Garcia escribió:
> Buenas a todo el grupo.
> Antes que nada, ofrezco una disculpa por el tamaño del post.
>
> Debian Squeeze, kernel 2.6.30-2-686
> en una maquina NAD-2073-435 de portwell, de la cual no hay mucha info en la
> red. Tiene, entre otras cosas una tarjeta VIA integrada , mas abajo hay
> detalles.
>
> Tengo un error en X al iniciar, lo curioso, al teclear startx desde la
> consola (como usuario normal), inicia y funciona perfectamente.
>
> Me pasaron el equipo funcionando correctamente con Ubuntu version
> no-se-que. y, obviamente quise cambiarlo a Debian.
>
> Posiblemente esté haciendo algo mal, o estoy pasando algo por alto,
> pero no se que es, y mi nivel de novato en estado permanente no me
> permite darme cuenta de que :( y ya estoy atorado en un loop infinito
> de busqueda en google.
>
> ¿Alguna recomendacion?
>
> A continuacion detalles.
>
> Al iniciar el equipo, obtengo un error en el servidor X; al
> seleccionar ver el log, se muestra
>
> X.Org X Server 1.6.4
> Release Date: 2009-9-27
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.31 i686 Debian
> Current Operating System: Linux heich-mini 2.6.30-2-686 #1 SMP Sat Sep
> 26 01:16:22 UTC 2009 i686
> Build Date: 30 September 2009 08:45:15PM
> xorg-server 2:1.6.4-2 (bgoglin@debian.org)
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 14:34:42 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> Fulfilled via DRI at 5636096
> Freed 5636096 (pool 2)
> SELinux: Disabled on system, not enabling in X server
> Freed 5636096 (pool 1)
> error SETTING MTRR (base = 0xf0000000, size = 0x00800000, type =1) Inva
>
>
>
> el contenido de Xorg.0.log, resumido a la mayoria de mensajes de error
> (WW) o (EE) vistos es:
>
> X.Org X Server 1.6.4
> Release Date: 2009-9-27
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.31 i686 Debian
> Current Operating System: Linux heich-mini 2.6.30-2-686 #1 SMP Sat Sep
> 26 01:16:22 UTC 2009 i686
> Build Date: 30 September 2009 08:45:15PM
> xorg-server 2:1.6.4-2 (bgoglin@debian.org)
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 14:34:42 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Card0"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> Entry deleted from font path.
>
> ...
> ...
>
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
> 'vmmouse' will be disabled.
> (WW) Disabling Mouse0
> (WW) Disabling Keyboard0
>
> ...
> ...
>
> (--) PCI:*(0:1:0:0) 1106:3344:1106:3344 VIA Technologies, Inc.
> CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] rev 1, Mem @
> 0xf0000000/67108864, 0xf4000000/16777216, BIOS @ 0x????????/65536
> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
> (II) No APM support in BIOS or kernel
>
> ...
> ...
> (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card
> IDs. (--) CHROME(0): Detected VIA VT3344 (VM800) - EPIA EN.
>
> ...
> ...
>
> (WW) CHROME(0): [drm] The DRM heap and pixmap cache memory may be too
> [drm] small for optimal performance. Please increase
> [drm] the frame buffer memory area in the BIOS.
>
>
>
>
>
>
> lspci muestra
>
> 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host
> Bridge 00:00.1 Host bridge: VIA Technologies, Inc.
> CN700/VN800/P4M800CE/Pro Host Bridge 00:00.2 Host bridge: VIA
> Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge 00:00.3 Host
> bridge: VIA Technologies, Inc. PT890 Host Bridge
> 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host
> Bridge 00:00.7 Host bridge: VIA Technologies, Inc.
> CN700/VN800/P4M800CE/Pro Host Bridge 00:01.0 PCI bridge: VIA Technologies,
> Inc. VT8237/VX700 PCI Bridge 00:08.0 Ethernet controller: Realtek
> Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 00:0f.0 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800
> Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01)
>
>
>
> Despues de correr X -configure, y X -config /root/Xorg.conf.new, solo
> obtengo una pantalla negra.
>
> aun asi, copio el Xorg.conf.new a /etc/X11/xorg.conf. al reiniciar, se
> muestra el mismo error en el servidor X comentado arriba
>
>
> el contenido del Xorg.conf, en la seccion "Device" dice (quitando las
> lineas comentadas)
>
> Section "Device"
> Identifier "Card0"
> Driver "openchrome"
> VendorName "VIA Technologies, Inc."
> BoardName "CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro]"
> BusID "PCI:1:0:0"
> EndSection
>
> Por ultimo, no sé si sea de utilidad, ejecuto
>
> cat /var/log/messages|grep agp
>
> y obtengo:
>
> Nov 18 14:45:55 heich-mini kernel: [ 1.687928] agpgart: Detected
> VIA VT3314 chipset
> Nov 18 14:45:55 heich-mini kernel: [ 1.698402] agpgart-via
> 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
> Nov 18 14:46:20 heich-mini kernel: [ 37.968560] agpgart-via
> 0000:00:00.0: AGP 3.5 bridge
> Nov 18 14:46:20 heich-mini kernel: [ 37.968612] agpgart-via
> 0000:00:00.0: putting AGP V3 device into 8x mode
> Nov 18 14:46:40 heich-mini kernel: [ 58.741911] agpgart-via
> 0000:00:00.0: AGP 3.5 bridge
> Nov 18 14:46:40 heich-mini kernel: [ 58.741965] agpgart-via
> 0000:00:00.0: putting AGP V3 device into 8x mode
> Nov 18 14:47:01 heich-mini kernel: [ 78.970039] agpgart-via
> 0000:00:00.0: AGP 3.5 bridge
> Nov 18 14:47:01 heich-mini kernel: [ 78.970093] agpgart-via
> 0000:00:00.0: putting AGP V3 device into 8x mode
>
> Filtrando el mismo archivo messages, por la palabra "Error" tengo
>
> Nov 17 20:30:04 heich-mini kernel: [ 0.000000] ACPI Error
> (tbxfroot-0219): A valid RSDP was not found [20090320]
> Nov 18 14:11:37 heich-mini kernel: [ 0.000000] ACPI Error
> (tbxfroot-0219): A valid RSDP was not found [20090320]
> Nov 18 14:23:01 heich-mini kernel: [ 0.000000] ACPI Error
> (tbxfroot-0219): A valid RSDP was not found [20090320]
> Nov 18 14:33:52 heich-mini kernel: [ 0.000000] ACPI Error
> (tbxfroot-0219): A valid RSDP was not found [20090320]
> Nov 18 14:45:55 heich-mini kernel: [ 0.000000] ACPI Error
> (tbxfroot-0219): A valid RSDP was not found [20090320]
>
>
> se me olvidaba!! lsmod me muestra, etre otras cosas (poniendo
> solamente lo relacionado con el video):
>
> Module Size Used by
> via 33888 0
> drm 137920 1 via
> i2c_viapro 6624 0
> i2c_core 20844 2 drm,i2c_viapro
> via82cxxx 6044 2
> via_agp 7564 1
> agpgart 30836 2 drm,via_agp
>
>
>
> Agradezco de antemano cualquier guia a seguir
> Saludos
>
Si funciona startx, no tiene nada que ver con los módulos ni con la
configuración de X.
¿Probaste con /etc/init.d/kdm start? (o gdm o xdm)
Probá instalar otro gestor de acceso, por ejemplo, si usas gdm, instalá xdm.
Luego con dpkg-reconfigure gdm selecciona que querés usar xdm.
Reply to: