Re: System pausiert bis Festplattenzugriff
Am Wednesday 03 September 2008 21:16:44 schrieb Jochen Schulz:
> Matthias Breier:
> > Sep 3 09:57:28 dell-gonzo kernel: [ 624.697854] sd 0:0:0:0: [sda]
> > Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Sep 3
> > 09:57:28 dell-gonzo kernel: [ 624.697854] sd 0:0:0:0: [sda] Sense Key :
> > Medium Error [current] [descriptor] Sep 3 09:57:28 dell-gonzo kernel: [
> > 624.697854] Descriptor sense data with sense descriptors (in hex): Sep 3
> > 09:57:28 dell-gonzo kernel: [ 624.697854] 72 03 11 04 00 00 00
> > 0c 00 0a 80 00 00 00 00 00 Sep 3 09:57:28 dell-gonzo kernel: [
> > 624.697854] 01 bb ac 41 Sep 3 09:57:28 dell-gonzo kernel: [
> > 624.697854] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto
> > reallocate failed
>
> Ich würde auch raten, dass die Platte stirbt. Installier mal
> smartmontools und poste die Ausgabe von smartctl -a. Knoppix brauchst Du
> dafür nicht.
Ok, ich hab die Ausgabe mal an diese Mail angehangen.
Backups mache ich ja glücklicherweise täglich, so dass ich wohl nicht von zu
argem Datenverlust getroffen würde. Wenn sie tatsächlich bald stirbt, muss es
wohl ein Montagsgerät sein, das Notebook selber ist ja erst 2 Monate alt...
>
> Poste auch mal die Ausgabe von smartctl -a von einem Zeitpunkt, an dem
> das Problem auftritt. Mich interessiert insbesondere die Temperatur.
Seit heute Mittag ist das Problem merkwürdigerweise noch nicht wieder
aufgetreten. Ich hatte aber mit "hddtemp" immer Werte um die 42°C gemessen,
auch in Zeiten, zu denen der Fehler auftrat.
>
> J.
Ciao
Matthias
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio family
Device Model: WDC WD2500BEVS-75UST0
Serial Number: WD-WXE508LTC349
Firmware Version: 01.01A01
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Sep 3 21:43:08 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9180) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 199 199 051 Pre-fail Always - 273
3 Spin_Up_Time 0x0003 187 187 021 Pre-fail Always - 1616
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 90
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 535
10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4544
194 Temperature_Celsius 0x0022 108 098 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 545
241 Unknown_Attribute 0x0032 177 177 000 Old_age Always - 23162765932688
242 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 391492632
SMART Error Log Version: 1
ATA Error Count: 267 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 267 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 ac bb 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 ee 6e b8 07 08 00:11:17.448 READ FPDMA QUEUED
60 08 00 41 ac bb 01 08 00:11:17.448 READ FPDMA QUEUED
27 00 00 00 00 00 00 08 00:11:17.447 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 08 00:11:17.447 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:11:17.447 SET FEATURES [Set transfer mode]
Error 266 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 ac bb 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 41 ac bb 01 08 00:11:13.209 READ FPDMA QUEUED
60 08 00 ee 6e b8 07 08 00:11:13.209 READ FPDMA QUEUED
27 00 00 00 00 00 00 08 00:11:13.209 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 08 00:11:13.208 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:11:13.208 SET FEATURES [Set transfer mode]
Error 265 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 ac bb 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 ee 6e b8 07 08 00:11:09.104 READ FPDMA QUEUED
60 08 00 41 ac bb 01 08 00:11:09.104 READ FPDMA QUEUED
27 00 00 00 00 00 00 08 00:11:09.103 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 08 00:11:09.103 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:11:09.103 SET FEATURES [Set transfer mode]
Error 264 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 ac bb 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 41 ac bb 01 08 00:11:04.876 READ FPDMA QUEUED
60 08 00 ee 6e b8 07 08 00:11:04.876 READ FPDMA QUEUED
27 00 00 00 00 00 00 08 00:11:04.876 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 08 00:11:04.875 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:11:04.875 SET FEATURES [Set transfer mode]
Error 263 occurred at disk power-on lifetime: 523 hours (21 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 ac bb 40
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 ee 6e b8 07 08 00:11:00.915 READ FPDMA QUEUED
60 08 00 41 ac bb 01 08 00:11:00.915 READ FPDMA QUEUED
27 00 00 00 00 00 00 08 00:11:00.915 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 08 00:11:00.914 IDENTIFY DEVICE
ef 03 46 00 00 00 00 08 00:11:00.914 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 352 -
# 2 Short offline Interrupted (host reset) 80% 204 -
# 3 Short offline Completed without error 00% 1 -
# 4 Short offline Interrupted (host reset) 80% 1 -
# 5 Short offline Completed without error 00% 1 -
# 6 Offline Interrupted (host reset) 80% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: