Re: LVM: "no volume groups found" nach Kernelupdate

[David Burau <fangornx@gmx.de>]

Am Mittwoch, 3. September 2008 11:24 schrieb Matthias Haegele:

>
> Könnte es an der initrd liegen, bzw. an fehlenden Treibern in selbiger?

> --
> Gruesse/Greetings
> MH

habe ich auch schon überlegt. Ich benutze eine initrd, das 
mit "mkinitrd -o /boot/initrd.img-2.6.26.2 2.6.26.2" erstelle. Module (meiner 
Meinung nach relevant für raid u. lvm) im Kernel sind:

Aus der Ausgabe von make-kpkg kernel_image
-----------------------------------------------------------------------------------
*
* Multiple devices driver support (RAID and LVM)
*
Multiple devices driver support (RAID and LVM) (MD) [Y/n/?] y
  RAID support (BLK_DEV_MD) [Y/n/m/?] y
    Linear (append) mode (MD_LINEAR) [Y/n/m/?] y
    RAID-0 (striping) mode (MD_RAID0) [N/m/y/?] n
    RAID-1 (mirroring) mode (MD_RAID1) [Y/n/m/?] y
    RAID-10 (mirrored striping) mode (EXPERIMENTAL) (MD_RAID10) [N/m/y/?] n
    RAID-4/RAID-5/RAID-6 mode (MD_RAID456) [N/m/y/?] n
    Multipath I/O support (MD_MULTIPATH) [M/n/y/?] m
    Faulty test module for MD (MD_FAULTY) [M/n/y/?] m
  Device mapper support (BLK_DEV_DM) [Y/n/m/?] y
    Device mapper debugging support (DM_DEBUG) [Y/n/?] y
    Crypt target support (DM_CRYPT) [M/n/y/?] m
    Snapshot target (DM_SNAPSHOT) [N/m/y/?] n
    Mirror target (DM_MIRROR) [Y/n/m/?] y
    Zero target (DM_ZERO) [M/n/y/?] m
    Multipath target (DM_MULTIPATH) [M/n/y/?] m
      EMC CX/AX multipath support (DM_MULTIPATH_EMC) [M/n/?] m
      LSI/Engenio RDAC multipath support (EXPERIMENTAL) (DM_MULTIPATH_RDAC) 
[M/n/?] m
      HP MSA multipath support (EXPERIMENTAL) (DM_MULTIPATH_HP) [M/n/?] m
    I/O delaying target (EXPERIMENTAL) (DM_DELAY) [M/n/y/?] m
    DM uevents (EXPERIMENTAL) (DM_UEVENT) [N/y/?] n
-------------------------------------------------------------------------

Habe ich was vergessen?

Grüße

David Burau