Problem mit usb-storage
Hallo, ich habe in meinem Sony Vaio PCG-R600HFP eine memory stick slot, der
über usb und scsi-emulation und usb-storage angesprochen wird. Beim Booten
hängt der Rechner einige Sekunden bei:
May 3 18:28:13 benz505sx kernel: scsi 0:0:0:0: Direct-Access Sony
MSC-U03 1.00 PQ: 0 ANSI: 0 CCS
May 3 18:28:13 benz505sx kernel: sd 0:0:0:0: Attached scsi removable disk
sda
bootet dann aber normal weiter. Nun erscheint in der syslog aber laufend
folgende Meldung, die ständig weiterläuft:
May 4 12:25:31 benz505sx kernel: usb-storage: Call to
usb_stor_ctrl_transfer() returned 0
May 4 12:25:31 benz505sx kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
May 4 12:25:31 benz505sx kernel: usb-storage: Status code 0; transferred
18/18
May 4 12:25:31 benz505sx kernel: usb-storage: -- transfer complete
May 4 12:25:31 benz505sx kernel: usb-storage: CB data stage result is 0x0
May 4 12:25:31 benz505sx kernel: usb-storage: -- Result from auto-sense is
0
May 4 12:25:31 benz505sx kernel: usb-storage: -- code: 0x70, key: 0x2, ASC:
0x3a, ASCQ: 0x0
May 4 12:25:31 benz505sx kernel: usb-storage: (Unknown Key): (unknown
ASC/ASCQ)
May 4 12:25:31 benz505sx kernel: usb-storage: scsi cmd done, result=0x2
May 4 12:25:31 benz505sx kernel: usb-storage: *** thread sleeping.
May 4 12:25:33 benz505sx kernel: usb-storage: queuecommand called
May 4 12:25:33 benz505sx kernel: usb-storage: *** thread awakened.
May 4 12:25:33 benz505sx kernel: usb-storage: Command TEST_UNIT_READY (6
bytes)
May 4 12:25:33 benz505sx kernel: usb-storage: 00 00 00 00 00 00
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00 len=12
May 4 12:25:33 benz505sx kernel: usb-storage: Status code -32; transferred
12/12
May 4 12:25:33 benz505sx kernel: usb-storage: -- stall on control pipe
May 4 12:25:33 benz505sx kernel: usb-storage: Call to
usb_stor_ctrl_transfer() returned 2
May 4 12:25:33 benz505sx kernel: usb-storage: -- CB transport device
requiring auto-sense
May 4 12:25:33 benz505sx kernel: usb-storage: -- transport indicates
command failure
May 4 12:25:33 benz505sx kernel: usb-storage: Issuing auto-REQUEST_SENSE
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00 len=12
May 4 12:25:33 benz505sx kernel: usb-storage: Status code 0; transferred
12/12
May 4 12:25:33 benz505sx kernel: usb-storage: -- transfer complete
May 4 12:25:33 benz505sx kernel: usb-storage: Call to
usb_stor_ctrl_transfer() returned 0
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
May 4 12:25:33 benz505sx kernel: usb-storage: Status code 0; transferred
18/18
May 4 12:25:33 benz505sx kernel: usb-storage: -- transfer complete
May 4 12:25:33 benz505sx kernel: usb-storage: CB data stage result is 0x0
May 4 12:25:33 benz505sx kernel: usb-storage: -- Result from auto-sense is
0
May 4 12:25:33 benz505sx kernel: usb-storage: -- code: 0x70, key: 0x2, ASC:
0x3a, ASCQ: 0x0
May 4 12:25:33 benz505sx kernel: usb-storage: (Unknown Key): (unknown
ASC/ASCQ)
May 4 12:25:33 benz505sx kernel: usb-storage: scsi cmd done, result=0x2
May 4 12:25:33 benz505sx kernel: usb-storage: *** thread sleeping.
May 4 12:25:33 benz505sx kernel: usb-storage: queuecommand called
May 4 12:25:33 benz505sx kernel: usb-storage: *** thread awakened.
May 4 12:25:33 benz505sx kernel: usb-storage: Command TEST_UNIT_READY (6
bytes)
May 4 12:25:33 benz505sx kernel: usb-storage: 00 00 00 00 00 00
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00 len=12
May 4 12:25:33 benz505sx kernel: usb-storage: Status code -32; transferred
12/12
May 4 12:25:33 benz505sx kernel: usb-storage: -- stall on control pipe
May 4 12:25:33 benz505sx kernel: usb-storage: Call to
usb_stor_ctrl_transfer() returned 2
May 4 12:25:33 benz505sx kernel: usb-storage: -- CB transport device
requiring auto-sense
May 4 12:25:33 benz505sx kernel: usb-storage: -- transport indicates
command failure
May 4 12:25:33 benz505sx kernel: usb-storage: Issuing auto-REQUEST_SENSE
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
rqtype=21 value=0000 index=00 len=12
May 4 12:25:33 benz505sx kernel: usb-storage: Status code 0; transferred
12/12
May 4 12:25:33 benz505sx kernel: usb-storage: -- transfer complete
May 4 12:25:33 benz505sx kernel: usb-storage: Call to
usb_stor_ctrl_transfer() returned 0
May 4 12:25:33 benz505sx kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
May 4 12:25:33 benz505sx kernel: usb-storage: Status code 0; transferred
18/18
May 4 12:25:33 benz505sx kernel: usb-storage: -- transfer complete
May 4 12:25:33 benz505sx kernel: usb-storage: CB data stage result is 0x0
May 4 12:25:33 benz505sx kernel: usb-storage: -- Result from auto-sense is
0
May 4 12:25:33 benz505sx kernel: usb-storage: -- code: 0x70, key: 0x2, ASC:
0x3a, ASCQ: 0x0
May 4 12:25:33 benz505sx kernel: usb-storage: (Unknown Key): (unknown
ASC/ASCQ)
May 4 12:25:33 benz505sx kernel: usb-storage: scsi cmd done, result=0x2
May 4 12:25:33 benz505sx kernel: usb-storage: *** thread sleeping.
Auch kann ich den Stick nicht mounten, wenn ich ihn in den slot schiebe.
Angeblich sollte er mit mount -t vfat /dev/sda1 /mnt/stick zu mounten sein.
Da bekomme ich jedoch die Fehlermeldung:
mount: special device /dev/sda1 does not exist
und bei mount -t vfat /dev/sda /mnt/stick
mount: block device /dev/sda is write-protected, mounting read-only
mount: /dev/sda: can't read superblock
Ich steig nicht so richtig durch. Kann mir irgendjemand helfen?
Gruß
Benjamin
Reply to: