SATA HD einbinden
Hallo Leute,
ich habe eine neue SATA HD. Die habe ich ins System gehängt.
Syslog gibt dies aus:
Dec 19 19:48:41 pinguinstall kernel: libata version 2.00 loaded.
Dec 19 19:48:41 pinguinstall kernel: sata_via 0000:00:0f.0: version 2.0
Dec 19 19:48:41 pinguinstall kernel: sata_via 0000:00:0f.0: routed to
hard irq line 9
Dec 19 19:48:41 pinguinstall kernel: ata1: SATA max
UDMA/133 cmd 0x3430 ctl 0x3426 bmdma 0x3400 irq 201
Dec 19 19:48:41 pinguinstall kernel: ata2: SATA max UDMA/133 cmd 0x3428
ctl 0x3422 bmdma 0x3408 irq 201
Dec 19 19:48:41 pinguinstall kernel: scsi0 : sata_via
Dec 19 19:48:41 pinguinstall kernel: hdb:<6>ata1: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
Dec 19 19:48:41 pinguinstall kernel: ata1.00: ATA-7, max UDMA7,
488397168 sectors: LBA48 NCQ (depth 0/32)
Dec 19 19:48:41 pinguinstall kernel: ata1.00: ata1: dev 0 multi count
16
Dec 19 19:48:41 pinguinstall kernel: ata1.00: configured for
UDMA/133
Dec 19 19:48:41 pinguinstall kernel: scsi1 : sata_via
Dec 19 19:48:41 pinguinstall kernel: ata2: SATA link down 1.5 Gbps (SStatus 0
SControl 300)
Die HD ist noch nicht formatiert. Ich dachte, das könnte ich mit
GParted erledigen. Leider zeigt mir das nichts an.
Wie mache ich das am besten? Wie partitioniere und formatiere ich die
HD am besten?
Danke und Gruss
Dirk
Reply to: