[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: suspend to disk?

Frank Dietrich wrote:
> Mir würde nur folgendes einfallen:
> - unterschiedliche Kernel
>   uname -r
> - unterschiedliche Kernelkonfiguration
>   die Ausgaben mal vergleichen
>   egrep "^[^#].*(ACPI|APM|SUSPEND)" /boot/config-`uname -r`

Hallo,

ja ich habe auf jeden Fall unterschiedlicher Kernel.

ubuntu: default Kernel 2.6.15-23-386
deban:  vanilla Kernel 2.6.17.4

$ egrep "^[^#].*(ACPI|APM|SUSPEND)" /boot/config-`uname -r`
auf dem ubuntu:

CONFIG_SOFTWARE_SUSPEND=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_PCC=m
CONFIG_ACPI_SONY=m
CONFIG_ACPI_BLACKLIST_YEAR=2000
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_TC1100=m
CONFIG_ACPI_INITRD=y
CONFIG_ACPI_DEV=m
CONFIG_APM=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_PNPACPI=y
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_SCSI_SATA_ACPI=y


$ egrep "^[^#].*(ACPI|APM|SUSPEND)" /boot/config-`uname -r`
auf dem debian:

CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_PNPACPI=y

Mir fehlt also CONFIG_SOFTWARE_SUSPEND=y, aber das wird bei mir unter
menuconfig gar nicht angeboten bzw. unter xconfig ist es ausgegraut. Was
benötige ich, damit ich dieses Modul hinzufügen kann?

Danke & Gruß,
Alexander
Reply to: