Re: Optimale Faxlösung mit Sarge
On Mon, Jun 05, 2006 at 10:36:40PM +0200, Juergen Kosel wrote:
> Bei mgetty würde ich nun Zwecks weiterer Untersuchung auf die Logfiles
> verweisen. Aber bei Hylafax kenne ich mich nicht aus.
Das habe ich gefunden:
Jun 04 23:30:40.76: [30991]: REMOTE wants 9600 bit/s
Jun 04 23:30:40.76: [30991]: REMOTE wants A4 page width (215 mm)
Jun 04 23:30:40.76: [30991]: REMOTE wants unlimited page length
Jun 04 23:30:40.76: [30991]: REMOTE wants 3.85 line/mm
Jun 04 23:30:40.76: [30991]: REMOTE wants 1-D MH
Jun 04 23:30:40.76: [30991]: RECV training at v.29 9600 bit/s
Jun 04 23:30:40.76: [30991]: <-- [10:AT+FRM=96\r]
Jun 04 23:30:41.18: [30991]: --> [7:CONNECT]
Jun 04 23:30:42.74: [30991]: RECV: TCF 1840 bytes, 2% non-zero, 1799
zero-run
Jun 04 23:30:42.75: [30991]: --> [10:NO CARRIER]
Jun 04 23:30:42.75: [30991]: DELAY 75 ms
Jun 04 23:30:42.82: [30991]: TRAINING succeeded
Jun 04 23:30:42.82: [30991]: <-- [9:AT+FTH=3\r]
Jun 04 23:30:42.87: [30991]: --> [7:CONNECT]
Jun 04 23:30:42.87: [30991]: <-- data [3]
Jun 04 23:30:42.87: [30991]: <-- data [2]
Jun 04 23:30:44.13: [30991]: --> [2:OK]
Jun 04 23:30:44.13: [30991]: <-- [10:AT+FRM=96\r]
Jun 04 23:30:45.00: [30991]: --> [7:CONNECT]
Jun 04 23:30:45.00: [30991]: RECV: begin page
Jun 04 23:31:54.84: [30991]: RECV: 1157 total lines, 0 bad lines, 0
consecutive bad lines
Jun 04 23:31:54.84: [30991]: RECV: end page
Jun 04 23:31:54.84: [30991]: --> [10:NO CARRIER]
Jun 04 23:31:54.84: [30991]: <-- [9:AT+FRH=3\r]
Jun 04 23:31:55.27: [30991]: --> [7:CONNECT]
Allerdings ist die Gegenseite ein "normales" Faxgerät.
ciao, Dirk
--
| Akkuschrauber Kaufberatung and AEG GSM stuff |
| Visit my homepage: http://www.nutrimatic.ping.de/ |
| FIDO: Dirk Salva 2:244/6305.10 Internet: dsalvaATgmx.de |
| The "Ruhrgebiet", best place to live in Germany! |
Reply to: