Merkwürdiges ISDN Problem mit AVM B1 ISA
Hi Leute,
ich habe hier ein sehr merkwürdiges Problem mit einer AVM B1 ISA Karte
in einem meiner Rechner. Wähle ich mich damit bei Provider A ein, geht
alles problemlos. Bei Provider B aber geht der Rechner nach einigen
Minuten davon aus, daß die Verbindung unterbrochen wurde, obwohl ich an
meiner Siemens Telefonanlage sehen kann, daß der entsprechende B-Kanal
noch belegt ist und somit eine aktive Verbindung besteht. Vielleicht
liest hier ja jemand mit, der sich mit ISDN besser auskennt als ich,
ich komme nicht mehr weiter.
Debian Sarge.
Sind leider trotz Reduzierung auf das Wesentliche 10k, aber vielleicht
schaut ja doch jemand mal netterweise kurz drüber...
Ach ja: googeln nach den Fehlermeldungen war bisher nicht hilfreich:-/
May 7 12:35:10 rechner kernel: b1isa-150: card 1 "B1" ready.
May 7 12:35:10 rechner kernel: b1isa-150: card 1 Protocol: DSS1
May 7 12:35:10 rechner kernel: b1isa-150: card 1 Linetype: point to point
May 7 12:35:10 rechner kernel: b1isa-150: B1-card (3.11-03) now active
May 7 12:35:10 rechner kernel: kcapi: card 1 "b1isa-150" ready.
May 7 12:35:17 rechner kernel: Disabled Privacy Extensions on device c0300140(lo)
May 7 12:35:52 rechner kdm_greet[3511]: Can't open default user face
May 7 12:38:42 rechner kernel: kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x0010 LEN=0014
May 7 12:38:42 rechner kernel: Controller/PLCI/NCCI = 0x1
May 7 12:38:42 rechner kernel: Info = 0x0
May 7 12:38:42 rechner kernel: )
May 7 12:55:03 rechner -- MARK --
May 7 13:55:03 rechner -- MARK --
May 7 13:56:54 rechner pppd[4897]: Plugin userpass.so loaded.
May 7 13:56:54 rechner pppd[4897]: userpass: $Revision: 1.5 $
May 7 13:56:54 rechner pppd[4897]: Plugin capiplugin.so loaded.
May 7 13:56:54 rechner pppd[4897]: capiplugin: $Revision: 1.36 $
May 7 13:56:54 rechner pppd[4897]: capiconn: 1.10
May 7 13:56:54 rechner pppd[4898]: pppd 2.4.3 started by root, uid 0
May 7 13:56:54 rechner pppd[4898]: capiplugin: phase serialconn.
May 7 13:56:54 rechner pppd[4898]: capiplugin: contr=1
May 7 13:56:54 rechner last message repeated 3 times
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state 0 -> 1
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state state=1 event=1 ????
May 7 13:56:54 rechner last message repeated 2 times
May 7 13:56:54 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state 1 -> 0
May 7 13:56:54 rechner pppd[4898]: plci_change_state:0x0 0 -> 1 event=1
May 7 13:56:54 rechner pppd[4898]: capiplugin: dialing 00xxxxxxxxx (hdlc)
May 7 13:56:54 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state state=0 event=3 ????
May 7 13:56:54 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state state=0 event=3 ????
May 7 13:56:54 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:56:54 rechner pppd[4898]: controller 1: listen_change_state state=0 event=3 ????
May 7 13:56:54 rechner pppd[4898]: plci_change_state:0x101 1 -> 2 event=3
May 7 13:56:55 rechner pppd[4898]: plci_change_state:0x101 2 -> 3 event=6
May 7 13:56:55 rechner pppd[4898]: ncci_change_state:0x101 0 -> 1 event=1
May 7 13:56:55 rechner kernel: capilib_new_ncci: kcapi: appl 1 ncci 0x10101 up
May 7 13:56:55 rechner pppd[4898]: ncci_change_state:0x10101 1 -> 3 event=3
May 7 13:56:55 rechner pppd[4898]: ncci_change_state:0x10101 3 -> 4 event=7
May 7 13:56:55 rechner pppd[4898]: ncci 0x10101 up
May 7 13:56:55 rechner pppd[4898]: capiplugin: connected: "XX" -> "00xxxxxxxxx" outgoing (pcli=0x101/ncci=0x10101)
May 7 13:56:55 rechner pppd[4898]: capiplugin: using /dev/capi/0: "XX" -> "00xxxxxxxx" outgoing (pcli=0x101/ncci=0x10101)
May 7 13:56:56 rechner pppd[4898]: using channel 2
May 7 13:56:56 rechner pppd[4898]: Using interface ppp0
May 7 13:56:56 rechner pppd[4898]: Connect: ppp0 <--> /dev/capi/0
May 7 13:56:56 rechner pppd[4898]: capiplugin: phase establish (was serialconn).
May 7 13:56:56 rechner pppd[4898]: sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x7d02d12f> <pcomp> <accomp>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ConfReq id=0x10 <auth chap MD5> <magic 0x8030e3bb> <mrru 1524> <endpoint [local:35.38.30.30.2d.32.2e.44.4f.52]>]
May 7 13:56:56 rechner pppd[4898]: sent [LCP ConfRej id=0x10 <mrru 1524>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ConfNak id=0x1 <mru 1500>]
May 7 13:56:56 rechner pppd[4898]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x7d02d12f> <pcomp> <accomp>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ConfReq id=0x11 <auth chap MD5> <magic 0x8030e3bb> <endpoint [local:35.38.30.30.2d.32.2e.44.4f.52]>]
May 7 13:56:56 rechner pppd[4898]: sent [LCP ConfNak id=0x11 <auth chap MS-v2>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x7d02d12f> <pcomp> <accomp>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ConfReq id=0x12 <auth pap> <magic 0x8030e3bb> <endpoint [local:35.38.30.30.2d.32.2e.44.4f.52]>]
May 7 13:56:56 rechner pppd[4898]: sent [LCP ConfAck id=0x12 <auth pap> <magic 0x8030e3bb> <endpoint [local:35.38.30.30.2d.32.2e.44.4f.52]>]
May 7 13:56:56 rechner pppd[4898]: sent [LCP EchoReq id=0x0 magic=0x7d02d12f]
May 7 13:56:56 rechner pppd[4898]: capiplugin: phase authenticate (was establish).
May 7 13:56:56 rechner pppd[4898]: sent [PAP AuthReq id=0x1 user="xxxxxx@xxxxxxxxx" password=<hidden>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP EchoRep id=0x0 magic=0x8030e3bb]
May 7 13:56:56 rechner pppd[4898]: rcvd [PAP AuthAck id=0x1 ""]
May 7 13:56:56 rechner pppd[4898]: PAP authentication succeeded
May 7 13:56:56 rechner pppd[4898]: capiplugin: phase network (was authenticate).
May 7 13:56:56 rechner pppd[4898]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
May 7 13:56:56 rechner pppd[4898]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
May 7 13:56:56 rechner pppd[4898]: rcvd [IPCP ConfReq id=0x88 <addr xxx.xxx.64.69>]
May 7 13:56:56 rechner pppd[4898]: sent [IPCP ConfAck id=0x88 <addr xxx.xxx.64.69>]
May 7 13:56:56 rechner pppd[4898]: rcvd [LCP ProtRej id=0x7c 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
May 7 13:56:56 rechner pppd[4898]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
May 7 13:56:56 rechner pppd[4898]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
May 7 13:56:56 rechner pppd[4898]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
May 7 13:56:56 rechner pppd[4898]: rcvd [IPCP ConfNak id=0x2 <addr xxx.xx.23.236>]
May 7 13:56:56 rechner pppd[4898]: sent [IPCP ConfReq id=0x3 <addr xxx.xx.23.236>]
May 7 13:56:56 rechner pppd[4898]: rcvd [IPCP ConfAck id=0x3 <addr xxx.xx.23.236>]
May 7 13:56:56 rechner pppd[4898]: not replacing default route to eth0 [192.168.xxx.xxx]
May 7 13:56:56 rechner pppd[4898]: Cannot determine ethernet address for proxy ARP
May 7 13:56:56 rechner pppd[4898]: local IP address xxx.xx.23.236
May 7 13:56:56 rechner pppd[4898]: remote IP address xxx.xxx.64.69
May 7 13:56:56 rechner pppd[4898]: capiplugin: phase running (was network).
May 7 13:56:56 rechner pppd[4898]: Script /etc/ppp/ip-up started (pid 4910)
May 7 13:56:57 rechner pppd[4898]: Script /etc/ppp/ip-up finished (pid 4910), status = 0x0
May 7 13:58:36 rechner pppd[4898]: ncci_change_state:0x10101 4 -> 7 event=10
May 7 13:58:36 rechner pppd[4898]: ncci_change_state:0x10101 7 -> 0 event=13
May 7 13:58:36 rechner kernel: kcapi: appl 1 ncci 0x10101 down
May 7 13:58:36 rechner pppd[4898]: plci_change_state:0x101 3 -> 7 event=8
May 7 13:58:36 rechner pppd[4898]: DISCONNECT_IND reason 0x3302 (Protocol error layer 2) for plci 0x101
May 7 13:58:36 rechner pppd[4898]: plci_change_state:0x101 7 -> 8 event=9
May 7 13:58:36 rechner pppd[4898]: plci_change_state:0x101 8 -> 0 event=11
May 7 13:58:36 rechner pppd[4898]: capiplugin: disconnect(remote): "XX" -> "00xxxxxxxxxx" outgoing (pcli=0x101/ncci=0x10101) 0x3302 (0x3301) - Protocol error layer 2
May 7 13:58:36 rechner pppd[4898]: Hangup (SIGHUP)
May 7 13:58:36 rechner pppd[4898]: capiplugin: phase terminate (was running).
May 7 13:58:36 rechner pppd[4898]: capiplugin: phase network (was terminate).
May 7 13:58:36 rechner pppd[4898]: Connect time 1.7 minutes.
May 7 13:58:36 rechner pppd[4898]: Sent 10907 bytes, received 35358 bytes.
May 7 13:58:36 rechner pppd[4898]: Script /etc/ppp/ip-down started (pid 5012)
May 7 13:58:36 rechner pppd[4898]: capiplugin: phase establish (was network).
May 7 13:58:36 rechner pppd[4898]: sent [LCP TermReq id=0x3 "User request"]
May 7 13:58:36 rechner pppd[4898]: Script /etc/ppp/ip-down finished (pid 5012), status = 0x0
May 7 13:58:39 rechner pppd[4898]: sent [LCP TermReq id=0x4 "User request"]
May 7 13:58:42 rechner pppd[4898]: capiplugin: phase disconnect (was establish).
May 7 13:58:42 rechner pppd[4898]: Connection terminated.
May 7 13:58:42 rechner pppd[4898]: tcflush failed: Input/output error
May 7 13:58:42 rechner pppd[4898]: capiplugin: phase dead (was disconnect).
May 7 13:58:42 rechner pppd[4898]: controller 1: listen_change_state 0 -> 1
May 7 13:58:42 rechner pppd[4898]: controller 1: listen_change_state state=1 event=1 ????
May 7 13:58:42 rechner last message repeated 2 times
May 7 13:58:42 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:58:42 rechner pppd[4898]: controller 1: listen_change_state 1 -> 0
May 7 13:58:42 rechner pppd[4898]: Modem hangup
May 7 13:58:43 rechner pppd[4898]: controller 1: listen_change_state 0 -> 1
May 7 13:58:43 rechner pppd[4898]: controller 1: listen_change_state state=1 event=1 ????
May 7 13:58:43 rechner last message repeated 2 times
May 7 13:58:43 rechner pppd[4898]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
May 7 13:58:43 rechner pppd[4898]: controller 1: listen_change_state 1 -> 0
May 7 13:58:43 rechner pppd[4898]: capiplugin: exit
May 7 13:58:43 rechner pppd[4898]: Exit.
May 7 13:58:43 rechner kernel: kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000d LEN=0014
May 7 13:58:43 rechner kernel: Controller/PLCI/NCCI = 0x1
May 7 13:58:43 rechner kernel: Info = 0x0
May 7 13:58:43 rechner kernel: )
May 7 13:58:43 rechner kernel: kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000e LEN=0014
May 7 13:58:43 rechner kernel: Controller/PLCI/NCCI = 0x1
May 7 13:58:43 rechner kernel: Info = 0x0
May 7 13:58:43 rechner kernel: )
ciao, Dirk
Reply to: