Re: CPU Temperatur
frank paulsen schrieb:
>>On Thu, Apr 07, 2005 at 11:59:20AM +0200, Christian Lehmann wrote:
>>
>>
>>>ich habe ein ASUS P2B Bord + 800 Mhz CPU als Server laufen. Leider habe
>>>
>>>
>hmm. mein P2B verdaut laut handbuch PentiumII(233-400MHz) und hat im
>BIOS eine funktionierende anzeige der CPU- und Bordtemperatur.
>
>
Sorry,
sowas passiert wenn man immer von Asus kauft ;) - Es ist nicht das P2B
sondern schon das CUSL-2 von ASUS. Und das kommt dann auch mit 800 Mhz
zurecht ;)
Ahhh und da fällt mir auch ein wo das P2B Bord mit dem 300er Celeron
steht *g*.
Ändert aber nichts daran dass mein Problem mit dem Sensors detect noch
immer besteht. Hier mal der Auszug:
debian:~# sensors
No sensors found!
debian:~# /usr/src/lm_sensors-2.8.8/prog/detect/sensors-detect
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
IF THIS IS AN IBM THINKPAD, PRESS CTRL-C NOW!
IBM Thinkpads have a severely broken i2c/SMBus implementation, just
scanning
the bus will break your Thinkpad forever!
If this is a non-Thinkpad IBM, we still suggest you press CTRL+C. We have
had users reporting system breakage on other IBM systems as well.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel 82801BA ICH2
Use driver `i2c-matroxfb' for device 01:00.0: MGA G400 AGP
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): YES
Module loaded succesfully.
Load `i2c-matroxfb' (say NO if built into your kernel)? (YES/no): YES
FATAL: Module i2c_matroxfb not found.
Loading failed... skipping.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double
detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at e800
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x2d
Probing for `Myson MTP008'... Failed!
Probing for `National Semiconductor LM78'... Failed!
Probing for `National Semiconductor LM78-J'... Failed!
Probing for `National Semiconductor LM79'... Failed!
Probing for `National Semiconductor LM80'... Failed!
Probing for `National Semiconductor LM85 or LM96000'... Failed!
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... Failed!
Probing for `SMSC EMC6D100 or EMC6D101'... Failed!
Probing for `National Semiconductor LM87'... Failed!
Probing for `National Semiconductor LM93'... Failed!
Probing for `Winbond W83781D'... Failed!
Probing for `Winbond W83782D'... Failed!
Probing for `Winbond W83783S'... Failed!
Probing for `Winbond W83791D'... Failed!
Probing for `Winbond W83792D'... Failed!
Probing for `Winbond W83627HF'... Failed!
Probing for `Asus AS99127F (rev.1)'... Success!
(confidence 8, driver `w83781d'), other addresses: 0x48 0x49
Probing for `Asus AS99127F (rev.2)'... Failed!
Probing for `Asus ASB100 Bach'... Failed!
Probing for `Winbond W83L784R/AR'... Failed!
Probing for `Winbond W83L785R'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x00'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x80'... Failed!
Probing for `Genesys Logic GL520SM'... Failed!
Probing for `Genesys Logic GL525SM'... Failed!
Probing for `Analog Devices ADM9240'... Failed!
Probing for `Dallas Semiconductor DS1780'... Failed!
Probing for `National Semiconductor LM81'... Failed!
Probing for `Analog Devices ADM1026'... Failed!
Probing for `Analog Devices ADM1025'... Failed!
Probing for `Philips NE1619'... Failed!
Probing for `Analog Devices ADM1024'... Failed!
Probing for `Analog Devices ADM1029'... Failed!
Probing for `Analog Devices ADM1030'... Failed!
Probing for `Analog Devices ADM1031'... Failed!
Probing for `Analog Devices ADM1022'... Failed!
Probing for `Texas Instruments THMC50'... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'... Failed!
Probing for `ALi M5879'... Failed!
Client found at address 0x48
Probing for `National Semiconductor LM75'... Failed!
Probing for `National Semiconductor LM77'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Maxim MAX6650/MAX6651'... Failed!
Probing for `National Semiconductor LM92'... Failed!
Probing for `National Semiconductor LM76'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x49
Probing for `National Semiconductor LM75'... Failed!
Probing for `National Semiconductor LM77'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `National Semiconductor LM92'... Failed!
Probing for `National Semiconductor LM76'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (0x87)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0x87)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0x87)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0x87)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0x87)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0x87)
Probing for `Winbond W83L517D Super IO'
Failed! (0x87)
Do you want to scan for secondary Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83781d' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at e800' (Algorithm unavailable)
Busdriver `i2c-i801', I2C address 0x2d (and 0x48 0x49)
Chip `Asus AS99127F (rev.1)' (confidence: 8)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)? I2C/SMBus
To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
To load everything that is needed, add this to some /etc/rc* file:
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# I2C chip drivers
modprobe w83781d
# sleep 2 # optional
/usr/local/bin/sensors -s # recommended
#----cut here----
WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.
Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): YES
Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors
for initialization at boot time.
debian:~# sensors
No sensors found!
debian:~#
Wo soll ich nun die Datei hinschieben ? Denn ein Ordner etc/rc.d/init.d
gibt es nicht. Nur etc/init.d/ oder /etc/rcX.d/ wobei 0 <= X <= 6
Die Zeile in der modules.conf ist eingetragen!
Ideen ?
mfg
Christian
Reply to: