[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Sarge, SATA, 2.6.8 and IDE CDROM's



Hallo Ralph,

Ralph Stens, 30.11.2004 (d.m.y):

> ich denke die Unterstützung ist da - Intel ICH5R. Mein System läuft auch
> recht nett - selbst die Onboard Sound-Karte habe ich ans laufen gebracht.
> Leider ist mir das mit meinen beiden CDROM's bis jetzt nicht gelungen.
> Hier mal der meiner Meinung nach relevante Auszug :
> 
> ...
> SCSI subsystem initialized
> libata version 1.02 loaded.
> ata_piix version 1.02
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xEF88 ctl 0xEF86 bmdma 0xEF50 irq 193
> ata2: SATA max UDMA/133 cmd 0xEF68 ctl 0xEF82 bmdma 0xEF58 irq 193

Dass sind Deine beiden SATA-Platten, die erstmal als ATA-Devices...

> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003
> 88:207f
> ata1: dev 0 ATA, max UDMA/133, 160086528 sectors:
> ata1: dev 0 configured for UDMA/133
> scsi0 : ata_piix
> ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003
> 88:20ff
> ata2: dev 0 ATA, max UDMA7, 312581808 sectors: lba48
> ata2: dev 0 configured for UDMA/133
> scsi1 : ata_piix

...und dann als SCSI-Devices angesprochen werden:

> Using anticipatory io scheduler
>   Vendor: ATA       Model: Maxtor 6Y080L0    Rev: YAR4
>   Type:   Direct-Access                      ANSI SCSI revision: 05
>   Vendor: ATA       Model: SAMSUNG SP1614C   Rev: SW10
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> ACPI: PCI interrupt 0000:03:0b.0[A] -> GSI 23 (level, low) -> IRQ 185
> scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>         <Adaptec 2940 SCSI adapter>
>         aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
[..] 
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ...

Warum hast Du das weggelassen?

Der o.a. Output bezieht sich nur auf Deine Festplatten. Von einem
CD-ROM-Drive ist da so gar nichts zu sehen...

Probier mal folgendes:
christian@server|0:~$ dmesg | grep -i rom
hdc: BCD 16X CD-ROM, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
  Type:   CD-ROM                             ANSI SCSI revision: 02

Gruss,
Christian Schmidt
-- 
Der Krieg ist zu langsam für das Medium Fernsehen.
		-- Peter Slotterdijk

Attachment: signature.asc
Description: Digital signature


Reply to: