externe Festplatte - timeout
Hallo,
ich habe gerade meine neue externe Festplatte (160 GB, Samsung) bekommen, usb
angeschlossen und debian hochgefahren.
aus dmesg entnehme ich, dass die Platte erkannt wurde, aber am Ende kommen
timeout-error Meldungen (s.u.)
wenn ich
> cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: UJDA745 DVD/CDRW Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
wird die Platte nicht angezeigt.
mount -t vfat /dev/sda1 oder mkfs.ext3 /dev/sda1 funktioniert somit auch
nicht, weil sda1 nicht da ist.
wie bekomme ich die Platte zum Laufen? vielen Dank für Hinweise, Ciao Martin
PCI: Found IRQ 11 for device 02:08.0
hub.c: new USB device 00:1d.1-1, assigned address 2
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
Intel 810 + AC97 Audio, version 0.24, 18:08:21 Sep 19 2003
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.6
PCI: Sharing IRQ 11 with 02:00.1
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800,
IRQ 11
i810: Intel ICH4 mmio at 0xe0c46c00 and 0xe0c48800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel(R) 855PM chipset
agpgart: AGP aperture is 256M @ 0xd0000000
NTFS driver v1.1.22 [Flags: R/W MODULE]
[drm] AGP 0.99 aperture @ 0xd0000000 256MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
usb_control/bulk_msg: timeout
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 292 bytes per conntrack
blk: queue c0334960, I/O limit 4095Mb (mask 0xffffffff)
usb_control/bulk_msg: timeout
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: USB device not responding, giving up (error=-110)
hub.c: new USB device 00:1d.1-1, assigned address 3
PCI: Found IRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 02:00.0
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: USB device not responding, giving up (error=-110)
e100: eth0 NIC Link is Up 100 Mbps Full duplex
hub.c: new USB device 00:1d.1-1, assigned address 4
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: USB device not responding, giving up (error=-110)
hub.c: new USB device 00:1d.1-1, assigned address 5
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: USB device not responding, giving up (error=-110)
--
-----
please send me a CC when replying
Reply to: