compilation driver NVIDIA
J'essaie d'utiliser l'installateur de driver NVIDIA pour une carte MSI
NX6600 Series 256MB PCI-Express
sh NVIDIA-Linux-x86_64-1.0-8178-pkg2.run --kernel-source-path
'/usr/src/linux-source-2.6.15'
Je tourne en rond sans comprendre ce que je dois changer
ci dessous la fin du fichier nvidia-installer.log
------------------------------
Building modules, stage 2.
make -rR -f /usr/src/linux-source-2.6.15/scripts/Makefile.modpost
scripts/mod/modpost -m -a -i
/usr/src/linux-source-2.6.15/Module.symvers v
mlinux
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/usr/src/nv/nvidia.o
Warning: could not find
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/us
r/src/nv/.nv-kernel.o.cmd for
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-p
kg2/usr/src/nv/nv-kernel.o
cc
-Wp,-MD,/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/usr/src/nv/.n
vidia.mod.o.d -nostdinc -isystem
/usr/lib/gcc/x86_64-linux-gnu/4.0.3/includ
e -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall
-Wundef -W
strict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common
-ffreestan
ding -Os -fomit-frame-pointer -march=k8
-mno-red-zone -mcmodel=kernel -pipe -fno-reorder-blocks
-Wno-sign-compare -
fno-asynchronous-unwind-tables -funit-at-a-time -mno-sse -mno-mmx
-mno-sse2
-mno-3dnow -Wdeclaration-after-statement -Wno-pointer-sign
-DKBUILD_BASEN
AME=nvidia -DKBUILD_MODNAME=nvidia -DMODULE -c -o
/tmp/selfgz8426/NVIDIA-Lin
ux-x86_64-1.0-8178-pkg2/usr/src/nv/nvidia.mod.o
/tmp/selfgz8426/NVIDIA-Linux
-x86_64-1.0-8178-pkg2/usr/src/nv/nvidia.mod.c
ld -m elf_x86_64 -r -o
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/u
sr/src/nv/nvidia.ko
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/usr/sr
c/nv/nvidia.o
/tmp/selfgz8426/NVIDIA-Linux-x86_64-1.0-8178-pkg2/usr/src/nv/n
vidia.mod.o
NVIDIA: left KBUILD.
-> done.
-> Kernel module compilation complete.
ERROR: Unable to load the kernel module 'nvidia.ko'. This is most likely
because the kernel module was built using the wrong kernel source
files.
Please make sure you have installed the kernel source files for your
kernel and that they are properly configured; on Red Hat Linux
systems,
for example, be sure you have the 'kernel-source' RPM installed.
If you
know the correct kernel source files are installed, you may
specify the
kernel source path with the '--kernel-source-path' command line
option.
-> Kernel module load error: insmod: error inserting
'./usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
Adding 2409708k swap on /dev/hda5. Priority:-1 extents:1 across:2409708k
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level,
low) ->
IRQ 20
nvidiafb: nVidia device/chipset 10DE0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 80x30
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0xC0000000)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find
suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Reply to: