Re: gnomemeeting
Merci ,,,,,
J'ai trouvé la liste des commandes mais malheureusement j'ai le firmware
1.2.7 et les commandes ENABLE IP NAT, ADD IP NAT n'y sont pas
disponibles comme l'indique d'ailleur le tableau:
http://www.hifocus.net/phpBB/viewtopic.php?t=9518
>
> A noter dedans ENABLE IP NAT, ADD IP NAT et HELP
>
> Donc je suggère un petit ENABLE IP NAT puis test. Si ça ne marche pas,
> HELP ou HELP ADD IP NAT
>
> puis éventuellement
>
> ADD IP NAT 1720
> ADD IP NAT 5000
> ADD IP NAT 5001
> ... jusqu'à 5007 et de 5010 à 5013 (cf message de Daniel)
>
> Bon courage, le succès n'est pas loin je pense
>
Le courage y en a . Quand au succés j'ai l'impression qu'il s'éloigne.
> François Boisson
>
> Liste des commandes du Modem via telnet d'après
> http://www.google.fr/search?q=cache:xC7NJoHj9UoJ:www.hifocus.net/phpBB/View8265_150.html+Diva+2430+SE+SHOW+IP+NAT&hl=fr
> -------------------
> ADD DHCP STATICMAP
> ADD ETHERNET FILTER
> ADD IP FILTER
> ADD IP NAT
> ADD LOG
> CLEAR TRACES
> CONNECT
> DELETE DHCP STATICMAP
> DELETE FILTER
> DELETE IP NAT
> DIR
> DISABLE AUTORESET
> DISABLE BRIDGE SPANNINGTREE
> DISABLE DHCP STATICMAP
> DISABLE ECHO SERVER
> DISABLE FILTER
> DISABLE IP DIALONDEMAND
> DISABLE IP NAT
> DISABLE LOG MODULE
> DISABLE LOG OUTPUT
> DISABLE PPP CLEARTEXT AUTHENT~
> DISABLE PPP ECHO REQUEST
> DISABLE PPP IDLE TIMEOUT
> DISABLE SCROLL BREAK
> DISABLE SYSMAN
> DISABLE TFTP SERVER
> DISABLE TIMEPROTOCOL
> DISCONNECT
> ENABLE AUTORESET
> ENABLE BRIDGE SPANNINGTREE
> ENABLE DHCP STATICMAP
> ENABLE ECHO SERVER
> ENABLE FILTER
> ENABLE IP DIALONDEMAND
> ENABLE IP NAT
> ENABLE LOG MODULE
> ENABLE LOG OUTPUT
> ENABLE PPP CLEARTEXT AUTHENTI~
> ENABLE PPP ECHO REQUEST
> ENABLE PPP IDLE TIMEOUT
> ENABLE SCROLL BREAK
> ENABLE SYSMAN
> ENABLE TFTP SERVER
> ENABLE TIMEPROTOCOL
> EXIT
> GET TFTP FILE
> HELP
> LOGOUT
> MAIL TRACE FREEZE
> MAIL TRACE RELEASE
> MAIL TRACE START
> MAIL TRACE UNFREEZE
> PING
> PROFILE
> PUT TFTP FILE
> RESET
> RESET FACTORY
> SAVE
> SET ADSL MODULATION TYPE
> SET ATM SERVICE CATEGORY
> SET ATM VC
> SET BRIDGE AGINGTIME
> SET BRIDGE STP FORWARDDELAY
> SET BRIDGE STP HELLOTIME
> SET BRIDGE STP MAXAGE
> SET BRIDGE STP PORT PATHCOST
> SET BRIDGE STP PORT PRIORITY
> SET BRIDGE STP PRIORITY
> SET DATE
> SET DHCP DNS
> SET DHCP DOMAIN
> SET DHCP IPRANGE
> SET DHCP LEASEDURATION
> SET DHCP STATICMAP
> SET DHCP TYPE
> SET FILTER
> SET IP ADDRESS
> SET IP DEFAULT GATEWAY
> SET IP DNS1
> SET IP DNS2
> SET IP MASK
> SET IP NAT DEFAULT
> SET LOG FILTER
> SET PASSWORD
> SET PORT HTTP
> SET PORT TELNET
> SET PPP ECHO REQUEST INTERVAL
> SET PPP IDLE TIMEOUT
> SET PPP LOCAL PASSWORD
> SET PPP LOCAL USERNAME
> SET PPP MAX CONFIGURE
> SET PPP MAX FAILURE
> SET PPP MAX TERMINATE
> SET PPP MRU
> SET PPP RESTARTDELAY
> SET PPPOE SERVICE
> SET PROFILE NAME
> SET PROFILE TYPE
> SET TIME
> SET TIMEPROTOCOL SERVER
> SET TIMEPROTOCOL ZONE
> SET VDMZ MASK
> SHOW ADSL CONFIGURATION
> SHOW ADSL STATISTICS
> SHOW ATM CONFIGURATION
> SHOW ATM VC
> SHOW BRIDGE CONFIGURATION
> SHOW BRIDGE STATISTICS
> SHOW BRIDGE TABLE
> SHOW DATE
> SHOW DHCP CONFIGURATION
> SHOW DHCP STATICMAP
> SHOW DHCP STATUS
> SHOW ETHERNET STATISTICS
> SHOW FILTER
> SHOW IP ADDRESS
> SHOW IP CONFIGURATION
> SHOW IP NAT
> SHOW IP STATISTICS
> SHOW IP STATUS
> SHOW LOG
> SHOW LOG PLUS
> SHOW PORT HTTP
> SHOW PORT TELNET
> SHOW PPP CONFIGURATION
> SHOW PPP SERVICE
> SHOW PROFILES
> SHOW SAR CONFIGURATION
> SHOW SAR VC
> SHOW SAR VC TABLE
> SHOW SYSTEM STATUS
> SHOW TIME
> SHOW TIMEPROTOCOL CONFIGURATI~
> SHOW TRACE
> SHOW VERSION
> START TRACE
> STOP TRACE
> LAN
--
N'oubliez pas d'enlever <<antispam>> de l'adresse de retour.
Reply to: